• tankplanker@lemmy.world
    link
    fedilink
    arrow-up
    2
    ·
    edit-2
    10 hours ago

    The truly pedantic way is:

    • Coffee by volume not weight. It’s particularly noticeable with espresso. Obviously ridiculous to do irl because it means doing the penny test each time
    • Grind level needs adjusting throughout the day as humidity and temperature impact consistency. Also unless you freezing exactly one portion your beans off gas a little bit more each day, even in an air tight container as its not actually air tight
    • Temperature ramp should be considered and if you need to preheat everything or not to impact it. You want a slight downward temperature ramp to avoid over extraction at the end to reduce astringent and bitter flavours

    Obviously over the top for vast majority and pointless if you making dark roast beans, although over extraction with them is pretty rank. However if you have some expensive light roast then it can make a noticeable difference. Is that worth it to you? Who cares, how you like your coffee is how you like it, i don’t even do the above

    • Imgonnatrythis@sh.itjust.works
      link
      fedilink
      arrow-up
      9
      ·
      3 days ago

      Precisely. No matter what vantage point you are at there is someone just a bit higher casting judgement down upon you when it comes to coffee.

  • There’s always syndrome with a more particular, exotic, and “superior” brewing technique than your’s. Pour over has gotten that way, with people debating the superiority of the same brand of paper filter based on where it was made.

    I have manual hand-press espresso machine I’ve had for years, but my daily go-to is a cold brew. My process is

    • GRIND ALL THE COFFEE
    • Dump ALL THE COFFEE into a big, plastic bucket
    • Go to bed
    • Wake up and decant the results into a big pitcher

    Preparing the coffee for drinking is putting a kettle on, pouring a quarter cup of brewed into a cup and topping off with boiling water.

    The prep is easy and I do it about once a week; the brewed concentrate is enough to last me that long, and the day-to-day preparing a cup is almost as easy and fast as a pod machine.

    It’s funny that the process I used when I started with the espresso machine is far more involved and uses many more tools: scale; grinder; portafilter; newish little funnel attachment that’s really cleaned up filling the portafilter; newish little stirrer that’s improved the grounds distribution; tamper; rubber mat on which the tamping occurs; newish puck screen that dramatical improves keeping the head clean; espresso machine; knock box. What a laborious process, and it’s only gotten more steps and devices over the decades.

    But now, my daily method is just cold brewed from the fridge and boiling water from the kettle. And the only tools are a scale, grinder, and an Oxo cold brewer.

  • CrackedLinuxISO@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    10
    arrow-down
    1
    ·
    3 days ago

    WRONG!

    • The proper amount of coffee is actually “Up to the number 3 on my grinder’s fill chamber”
    • The proper waiting time is 6 minutes
    • The proper vantage point for casting judgement is behind a keyboard

    I’ll see you at the world barista championship

    • zabadoh@ani.socialOP
      link
      fedilink
      arrow-up
      8
      ·
      3 days ago

      You forgot the hand-forged carbon steel burr manual grinder, set on 3.275 clicks.

      Calibrated weekly to produce grounds within 10% of the required micron distribution.

    • sorrybookbroke@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      4
      ·
      edit-2
      3 days ago

      Also, you don’t actually press with a French press. The French have lied to us. You just let set down on top of the water to keep the heat otherwise, especially with more coffee, you’ll make more bitter than it should be.

      Also they forgot about the conversation starterthat’ll make you liked by all around every time you repeat it with “you know it’s just better this way. The filter catches tanen’s and changes them so much you know it’smore environmentally friendly andhonestlyeasiertocleanandtakecareofwhyhaventyoutriedityetIsentthelisticlethreetimesforbegginerfrenchpressespleaseimsolinely”

  • Synapse@lemmy.world
    link
    fedilink
    arrow-up
    4
    ·
    3 days ago

    I follow James Hoffman’s instructions:

    • 60~70g of ground coffee per liter of water
    • pour the water and stir
    • wait 5 minutes
    • stir the top to break the “crust” and let some more ground sink
    • wait 3 minutes
    • soup the foam away
    • place the lid but DO NOT press ! Just bring the filter to the surface of the liquid
    • serve
    • narp@feddit.org
      link
      fedilink
      arrow-up
      3
      ·
      3 days ago

      If he didn’t change it after his 8 year old yt video his instructions are definitely different:

      • no stirring directly after pouring
      • wait for 4 minutes
      • then stir
      • wait for at least(!) 5 minutes

      Did you watch his video or follow a written instruction? I noticed you can’t rely on those anymore… My guess is AI slop, that gets it ever so slightly wrong each time, always go straight to the source nowadays.

  • zabadoh@ani.socialOP
    link
    fedilink
    arrow-up
    6
    ·
    3 days ago

    The water compressed by half in step 4.

    She must be using a high quality french press!

  • Rob Bos@lemmy.ca
    link
    fedilink
    English
    arrow-up
    2
    ·
    3 days ago

    I bloom the coffee by pouring a little water in first, then swish it around 20 or 30 seconds. Then add the remaining water.

    I’m not sure why. It was how I was taught.

  • Oniononon@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    2
    arrow-down
    1
    ·
    3 days ago

    I just press down slowly and if it gets too hard to press, I pull back until the pressing gets easy again. I’ve found when pressing hard you start creating high pressure and thus extracting bitter flavor.

  • ClassifiedPancake@discuss.tchncs.de
    link
    fedilink
    arrow-up
    1
    ·
    3 days ago

    What does „replace plunger“ mean here?

    The way I know it:

    • Coffee in
    • Water in
    • Plunger in, just enough so all the coffee is submerged
    • Wait 4 minutes
    • Press down slowly
    • Done