• @B16_BR0TH3R@lemmy.world
    link
    fedilink
    English
    59
    edit-2
    16 hours ago

    This is idiotic. The fact is your electricity transmission system operator has to pay a lot of money to keep the grid stable at 50 or 60Hz or your electronics would fry. With wind and especially with solar power, the variable output is always pushing the frequency one way or the other, and that creates a great need for costly balancing services. Negative pricing is an example of such a balancing service. Sounds good, but for how long do you think your electricity company can keep on paying you to consume power?

    • @uis@lemm.ee
      link
      fedilink
      English
      23 hours ago

      Just have few percent of spare capacity. If suddenly it will become too sunny, you can just disconnect solar cells. If not sunny enough, then connect them back.

      Obviously I’m talking only about day - the only time when solar panel output can fluctuate.

    • @Blackmist@feddit.uk
      link
      fedilink
      English
      48 hours ago

      Sure, but for all the times my electricity goes negative for half an hour, the monthly bill indicates that is vastly outweighed by all the times that it isn’t.

    • @Kimano@lemmy.world
      link
      fedilink
      English
      1718 hours ago

      People also don’t realize that too much power is just as bad as too little, worse in fact. There’s always useful power sinks: pumped hydro, batteries, thermal storage, but these are not infinite.

      • @uis@lemm.ee
        link
        fedilink
        English
        13 hours ago

        Solar panels are easily disconnectable. Unlike conventional power plants it does not have spinning rust, that can walk away entire building.

      • @Aeri@lemmy.world
        link
        fedilink
        English
        615 hours ago

        Stupid question but can we not like, make toggleable solar panels? Like if I Just pull the plug extracting power from a solar panel does it explode or break or something?

        • @Cryophilia@lemmy.world
          link
          fedilink
          English
          -8
          edit-2
          9 hours ago

          Not really. You can discharge into the ground, but for large installations even the ground has a limited (local) capacity.

          Edit: explain yourselves, downvoting cowards

            • @Cryophilia@lemmy.world
              link
              fedilink
              English
              19 hours ago

              My understanding is that most large solar arrays don’t have this capability in any sort of automatic way, and at these levels of power it’s a bit more complicated than “just unplug it”.

              • @uis@lemm.ee
                link
                fedilink
                English
                03 hours ago

                most large solar arrays don’t have this capability in any sort of automatic way

                Look at this “manual” unplugger:

                and at these levels of power it’s a bit more complicated than “just unplug it”.

                Unplug many.

                • @Cryophilia@lemmy.world
                  link
                  fedilink
                  English
                  21 hour ago

                  “Everything is so fucking simple that I can easily figure out the solutions to giant societal problems with 15 minutes of googling” is the dumbest take I’ve heard all day. Granted it’s only 6am but still.

                  Maybe you’re not fucking Sun Tzu, Einstein and Jesus rolled in to one and there might be the occasional issue that’s slightly more complicated than your armchair quarterback solutions.

                  Christ you people piss me off.

          • @T156@lemmy.world
            link
            fedilink
            English
            39 hours ago

            Could they not just break the circuit for the panel, and stop it feeding back into the mains?

            • @Cryophilia@lemmy.world
              link
              fedilink
              English
              29 hours ago

              Yeah. My understanding is that most large solar complexes don’t have this capability, at least not in any efficient automatic way, but most home solar systems do.

          • @sep@lemmy.world
            link
            fedilink
            English
            09 hours ago

            I have no idea what i am talking about… But what would happen if you pulled a black tarp over the panel? Could even be automatic like the blends on a building. And even partial.

              • @Disgracefulone@discuss.online
                link
                fedilink
                English
                1
                edit-2
                8 hours ago

                You’re telling me a toggleable panel that flips when it needs to is too expensive? You’re already installing the panels. You’re already doing all that. The only difference is the material on the back side of the panel and of course some sort of crank and shaft to rotate it.

                Or if only there was some sort of powered component that could rotate it when it reached the capacity you know since the name of the game is power

                • @Allero
                  link
                  English
                  4
                  edit-2
                  8 hours ago

                  Solar panels are very cheap, and any modification, even just a moving cover, greatly ramps up prices. No, really.

                  We just need a lot of panels to generate significant amounts of electricity, which would necessitate a large cover or a lot of mechanisms - which would get expensive on that scale.

                • @Cryophilia@lemmy.world
                  link
                  fedilink
                  English
                  27 hours ago

                  In addition to what allero said, you seem to only be considering future installations rather than existing ones. Retrofitting existing equipment is massively more expensive than changing a design prior to building it.

    • @desktop_user@lemmy.blahaj.zone
      link
      fedilink
      English
      -87 hours ago

      sounds more like we should just change away from a shitty system that needs to be a specific frequency. If only there was an alternative…

    • @tweeks@feddit.nl
      link
      fedilink
      English
      417 hours ago

      Why isn’t this as easy as storing some of that excess energy in a home battery and letting the rest down in a wire into the ground? Then if it’s smart enough it could only give back energy when needed.

      • @untorquer@lemmy.world
        link
        fedilink
        English
        813 hours ago

        The easiest solution is to send the power somewhere else where it can offset the use of fossil fuels. This solution is fraught with political hurdles, subject to market forces (due to privatization) and often grid compatability issues(looking at you Texas). It is, however, a time tested and common method for mitigating excess production.

      • @pixeltree@lemmy.blahaj.zone
        link
        fedilink
        English
        817 hours ago

        While water in pipes is often a metaphor for electricity, it’s not particularly useful here. You can’t ground out part of a charge. Energy storage is the solution though. Batteries are good, pumping water up back up into dams to be regained from a hydro plant when needed is ideal, as I understand it.

      • @B16_BR0TH3R@lemmy.world
        link
        fedilink
        English
        5
        edit-2
        16 hours ago

        Well, that’s what they’re doing some places. The batteries assets are not in private homes usually though, they’re by themself or run by power-consuming industries. Batteries are expensive though, and they degrade quickly if you use them wrong. In the EU, ENTSO-E defines the market rules, trade systems and messaging systems that energy companies and asset owners play by. Sometimes the revenue-generating asset is a battery, sometimes it’s a hot water boiler, wind park, factory, hydro plant etc.

    • @EmperorHenry@discuss.tchncs.de
      link
      fedilink
      English
      014 hours ago

      With wind and especially with solar power, the variable output is always pushing the frequency one way or the other, and that creates a great need for costly balancing services.

      Speaking as a flashlight enthusiast…there’s many different ways to get a constant and consistent current. Sure we’d need to scale it up from a pocket-sized device to a whole fucking power grid, but with a big enough driver with the right arrangement of capacitors and all that, you’d easily be able to get a totally consistent current out of wind or solar

      • @untorquer@lemmy.world
        link
        fedilink
        English
        514 hours ago

        Having knowledge in power electronics i can confidently say the DC output of solar is easily and regularly inverted in phase with grid. In fact, DC is often used for undersea cables switching AC to dc then back to AC, All at extremely high voltage and varying demand(up yo 600kV/600MW but varying by installation).

        Wind turbines go online after the blades start spinning and connect to the grid in the same way as any other generator, controlled by internal electronics. Power is regulated through blade feathering and can be turned off as supply exceeds demand. This, other than for maintenance reasons, is why you might see one turbine spinning while the next is standing still. This capability actually means the grid is MORE stable with wind power.

        Any further fluctuation is managed in the same way as conventional power generation.

        • @A7thStone@lemmy.world
          link
          fedilink
          English
          115 hours ago

          To start the frequency of the electricity isn’t the issue. Second all modern electronics use switching power supplies which don’t care about frequency. That’s two incorrect things just in the second sentence that they literally said was fact.

          • NιƙƙιDιɱҽʂ
            link
            fedilink
            English
            8
            edit-2
            15 hours ago

            I’m pretty sure that “your electronics” in this context is most likely referring to the grid operator’s electronics, not individual personal devices. In that case, frequency is extremely important- if you like grid stability and dislike blackouts, that is. 😅

            • @A7thStone@lemmy.world
              link
              fedilink
              English
              -211 hours ago

              That’s a ridiculous way to define “your electronics”. The original commenter was trying to fear monger with incorrect information, and you are jumping to protect them. I didn’t realise the grid owners had astroturfers in the fediverse.

              • @TheOakTree@lemm.ee
                link
                fedilink
                English
                4
                edit-2
                8 hours ago

                I read it more as “your personal electronics won’t enjoy the brownouts and blackouts from having shitty frequency stability on the grid” more so than “your personal electronics will directly suffer from frequency instability,” but maybe I read it with subtext because I’m literally studying power systems right now.