Hello! I have been struggling through a few tutorials on getting a lemmy instance to work correctly when setup with Docker. I have it mostly done, but there are various issues each time that I do not have the knowledge to properly correct. I am familiar with Docker, and already have an Oracle VPS set up on ARM64 Ubuntu. I already have portainer and an NGINX proxy set up and working okay. I have an existing lemmy instance “running” but not quite working. My best guess here would be to have someone assist with setting up the docker-compose to work with current updates/settings, as well as the config.hjson.

TIA, and I cant wait to have my own entry into the fediverse working right!

  • Jattatak@beehaw.orgOP
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    Sure thing. lemmy.hjson:

    spoiler
    {
      # for more info about the config, check out the documentation
      # https://join-lemmy.org/docs/en/administration/configuration.html
      # only few config options are covered in this example config
    
      setup: {
        # username for the admin user
        admin_username: "noUsrHere"
        # password for the admin user
        admin_password: "noPassHere"
        # name of the site (can be changed later)
        site_name: "Bulwark of Boredom"
      }
    
      # the domain name of your instance (eg "lemmy.ml")
      hostname: "lemmy.bulwarkob.com"
      # address where lemmy should listen for incoming requests
      bind: "0.0.0.0"
      # port where lemmy should listen for incoming requests
      port: 8536
      # Whether the site is available over TLS. Needs to be true for federation to work.
      tls_enabled: true
    
      # pictrs host
      pictrs: {
        url: "http://pictrs:8080/"
        api_key: "API_KEY"
      }
    
      # settings related to the postgresql database
      database: {
        # name of the postgres database for lemmy
        database: "noDbHere"
        # username to connect to postgres
        user: "noUsrHere"
        # password to connect to postgres
        password: "noPassHere"
        # host where postgres is running
        host: "postgres"
        # port where postgres can be accessed
        port: 5432
        # maximum number of active sql connections
        pool_size: 5
      }
    }
    

    I am not certain if I am somehow getting the wrong location of the config in the container. There is no volume or link for a conf file from host:container, so I am just grabbing from the default area /etc /nginx/nginx.conf:

    spoiler
    # run nginx in foreground
    daemon off;
    pid /run/nginx/nginx.pid;
    user npm;
    
    # Set number of worker processes automatically based on number of CPU cores.
    worker_processes auto;
    
    # Enables the use of JIT for regular expressions to speed-up their processing.
    pcre_jit on;
    
    error_log /data/logs/fallback_error.log warn;
    
    # Includes files with directives to load dynamic modules.
    include /etc/nginx/modules/*.conf;
    
    events {
    	include /data/nginx/custom/events[.]conf;
    }
    
    http {
    	include                       /etc/nginx/mime.types;
    	default_type                  application/octet-stream;
    	sendfile                      on;
    	server_tokens                 off;
    	tcp_nopush                    on;
    	tcp_nodelay                   on;
    	client_body_temp_path         /tmp/nginx/body 1 2;
    	keepalive_timeout             90s;
    	proxy_connect_timeout         90s;
    	proxy_send_timeout            90s;
    	proxy_read_timeout            90s;
    	ssl_prefer_server_ciphers     on;
    	gzip                          on;
    	proxy_ignore_client_abort     off;
    	client_max_body_size          2000m;
    	server_names_hash_bucket_size 1024;
    	proxy_http_version            1.1;
    	proxy_set_header              X-Forwarded-Scheme $scheme;
    	proxy_set_header              X-Forwarded-For $proxy_add_x_forwarded_for;
    	proxy_set_header              Accept-Encoding "";
    	proxy_cache                   off;
    	proxy_cache_path              /var/lib/nginx/cache/public  levels=1:2 keys_zone=public-cache:30m max_size=192m;
    	proxy_cache_path              /var/lib/nginx/cache/private levels=1:2 keys_zone=private-cache:5m max_size=1024m;
    
    	log_format proxy '[$time_local] $upstream_cache_status $upstream_status $status - $request_method $scheme $host "$request_uri" [Client $remote_addr] [Length $body_bytes_sent] [Gzip $gzip_ratio] [Sent-to $server] "$http_user_agent" "$http_referer"';
    	log_format standard '[$time_local] $status - $request_method $scheme $host "$request_uri" [Client $remote_addr] [Length $body_bytes_sent] [Gzip $gzip_ratio] "$http_user_agent" "$http_referer"';
    
    	access_log /data/logs/fallback_access.log proxy;
    
    	# Dynamically generated resolvers file
    	include /etc/nginx/conf.d/include/resolvers.conf;
    
    	# Default upstream scheme
    	map $host $forward_scheme {
    		default http;
    	}
    
    	# Real IP Determination
    
    	# Local subnets:
    	set_real_ip_from 10.0.0.0/8;
    	set_real_ip_from 172.16.0.0/12; # Includes Docker subnet
    	set_real_ip_from 192.168.0.0/16;
    	# NPM generated CDN ip ranges:
    	include conf.d/include/ip_ranges.conf;
    	# always put the following 2 lines after ip subnets:
    	real_ip_header X-Real-IP;
    	real_ip_recursive on;
    
    	# Custom
    	include /data/nginx/custom/http_top[.]conf;
    
    	# Files generated by NPM
    	include /etc/nginx/conf.d/*.conf;
    	include /data/nginx/default_host/*.conf;
    	include /data/nginx/proxy_host/*.conf;
    	include /data/nginx/redirection_host/*.conf;
    	include /data/nginx/dead_host/*.conf;
    	include /data/nginx/temp/*.conf;
    
    	# Custom
    	include /data/nginx/custom/http[.]conf;
    }
    
    stream {
    	# Files generated by NPM
    	include /data/nginx/stream/*.conf;
    
    	# Custom
    	include /data/nginx/custom/stream[.]conf;
    }
    
    # Custom
    include /data/nginx/custom/root[.]conf;
    
    
    
      • Jattatak@beehaw.orgOP
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        I may be mistaken in my choice of proceeding, but as many are reporting, the install guide provided docker-compose and general docker instructions dont quite seem to work as expected. I have been trying to piecemeal this together, and the Included lemmy nginx service container was completely excluded (edited out/deleted) once I had the standalone nginx-proxy-manager setup and working for regular 80,443 ->1234 proxy requests to the lemmy-ui container.

        Does the lemmy nginx have a specific role or tie in? I am still fairly new to reverse proxying in general.

        • I eat words@group.lt
          link
          fedilink
          English
          arrow-up
          0
          ·
          edit-2
          1 year ago

          yeah, nginx config for lemmy is not very straighforward. you need to mimic this:

          worker_processes  1;
          events {
              worker_connections  1024;
          }
          http {
              upstream lemmy {
                  server "lemmy:8536";
              }
              upstream lemmy-ui {
                  server "lemmy-ui:1234";
              }
              server {
                listen       1236;
                server_name  localhost;
          
                # frontend
                location / {
                  set $proxpass "http://lemmy-ui";
                  if ($http_accept = "application/activity+json") {
                    set $proxpass "http://lemmy";
                  }
                  if ($http_accept = "application/ldr+json; profile=\"https://www.w3.org/ns/activitystreams\"") {
                    set $proxpass "http://lemmy";
                  }
                  if ($request_method = POST) {
                    set $proxpass "http://lemmy";
                  }
                  proxy_pass $proxpass;
          
                  rewrite ^(.+)/+$ $1 permanent;
          
                  # Send actual client IP upstream
                  proxy_set_header X-Real-IP $remote_addr;
                  proxy_set_header Host $host;
                  proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                }
          
                # backend
                location ~ ^/(api|pictrs|feeds|nodeinfo|.well-known) {
                  proxy_pass "http://lemmy";
                  proxy_http_version 1.1;
                  proxy_set_header Upgrade $http_upgrade;
                  proxy_set_header Connection "upgrade";
          
                  # Add IP forwarding headers
                  proxy_set_header X-Real-IP $remote_addr;
                  proxy_set_header Host $host;
                  proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                }
              }
          }
          

          also - can you check if all containers are running? just do docker-compose ps in the lemmy dir.

          • Jattatak@beehaw.orgOP
            link
            fedilink
            English
            arrow-up
            0
            ·
            1 year ago

            All containers are running. I handle them with Portainer, though I build the stack from the CLI in the lemmy dir, so Portainer cant fully manage them. Reboots and logs and networking and such work fine though.

            As for the nginx config, the nginx proxy manager I use currently has all proxy-host/settings setup from the webGUI, where I use the GUI to set up the proxy host information and SSL information. I did no manual edits to any configurations or settings of the container during or after compose. Only GUI actions. When looking at the nginx.conf I replied with here (my current conf), I do not see anything related to that proxy host I created from the GUI. I am not sure if that is normal or not, or if I maybe have a wrong .conf included here.

            With that in mind, would you suggest I simply overwrite and/or add your snippet to my existing conf file?

            • I eat words@group.lt
              link
              fedilink
              English
              arrow-up
              0
              ·
              1 year ago

              try to look here for the config file:

              include /etc/nginx/conf.d/*.conf;
              	include /data/nginx/default_host/*.conf;
              	include /data/nginx/proxy_host/*.conf;
              	include /data/nginx/redirection_host/*.conf;
              	include /data/nginx/dead_host/*.conf;
              	include /data/nginx/temp/*.conf;
              

              btw, i think port in lemmy.bulwarkob.com:1236 in docker-compose is not needed for you, should be just lemmy.bulwarkob.com

              • Jattatak@beehaw.orgOP
                link
                fedilink
                English
                arrow-up
                0
                ·
                1 year ago

                I appreciate your patience and clear assistance.

                conf.d/* has two configurations that appear to be some form of default. default.conf and production.conf. production.conf is only for the admin GUI. default.conf:

                Container has a volume set /lemmy/docker/nginx-proxy-manager/data:/data

                I have those folders and more, and they DO seem to have the correct custom item.

                Specifically, in the proxy_host folder I have a configuration for the proxy host I set up (1.conf) in the GUI:

                spoiler
                
                # ------------------------------------------------------------
                # lemmy.bulwarkob.com
                # ------------------------------------------------------------
                
                
                server {
                  set $forward_scheme http;
                  set $server         "172.24.0.5";
                  set $port           1234;
                
                  listen 80;
                listen [::]:80;
                
                listen 443 ssl http2;
                listen [::]:443 ssl http2;
                
                
                  server_name lemmy.bulwarkob.com;
                
                
                  # Let's Encrypt SSL
                  include conf.d/include/letsencrypt-acme-challenge.conf;
                  include conf.d/include/ssl-ciphers.conf;
                  ssl_certificate /etc/letsencrypt/live/npm-1/fullchain.pem;
                  ssl_certificate_key /etc/letsencrypt/live/npm-1/privkey.pem;
                
                
                
                  # Block Exploits
                  include conf.d/include/block-exploits.conf;
                
                
                
                
                    # Force SSL
                    include conf.d/include/force-ssl.conf;
                
                
                  access_log /data/logs/proxy-host-1_access.log proxy;
                  error_log /data/logs/proxy-host-1_error.log warn;
                
                
                  location / {
                
                
                
                
                
                    # Proxy!
                    include conf.d/include/proxy.conf;
                  }
                
                
                  # Custom
                  include /data/nginx/custom/server_proxy[.]conf;
                }
                
                

                The rest of the folders are empty:

                • I eat words@group.lt
                  link
                  fedilink
                  English
                  arrow-up
                  0
                  ·
                  1 year ago

                  okay, i don’t know how npm works, could you check this tutorial to see if you have set it up similarly?

                  https://youtu.be/6lQFZvCCe7U

                  also - check docker-compose.yml settings to remove port for lemmy host and i think you need to set use https to true as it is provided by npm

                  • Jattatak@beehaw.orgOP
                    link
                    fedilink
                    English
                    arrow-up
                    1
                    ·
                    1 year ago

                    I actually started with this tutorial a few days ago after failing the official guide. I followed it but was unable to get it running due to unexpected errors. Im guessing this tutorial is somewhat out of date. Ive made progress since using that guide though so I will see if I can pull any useful bits out of it later today and continue.

                    Worst case, I could also just ditch NPM if I can get another NGINX set up in a way that you might know how to do correctly.

                  • Jattatak@beehaw.orgOP
                    link
                    fedilink
                    English
                    arrow-up
                    0
                    ·
                    1 year ago

                    Hey, if you still feel like helping out :D

                    Ive been through a boatload of changes today since earlier. Ive rebuilt using mostly the provided yml in the official guide, and after some tweaking, almost everything is working. The internal proxy is now working, and the containers are working amongst themselves fully as far as I can tell. I do not know how to setup a web facing reverse proxy in a way that works around the internal proxy already running (other than the already in place NPM). I turned the NPM back on, and was able to get it working to reach the site, however I cannot reach any other communities from within my site. I believe the reverse proxy NPM is just not set up right. Error message in lemmy:

                    spoiler
                    ERROR HTTP request{http.method=GET http.scheme="https" http.host=lemmy.bulwarkob.com http.target=/api/v3/ws otel.kind="server" request_id=69004ca6-7967-48c3-a4d2-583e961e34d3 http.status_code=101 otel.status_code="OK"}: lemmy_server::api_routes_websocket: couldnt_find_object: Request error: error sending request for url (https://midwest.social/.well-known/webfinger?resource=acct:projectzomboid@midwest.social): operation timed out
                    
                       0: lemmy_apub::fetcher::search::search_query_to_object_id
                    
                                 at crates/apub/src/fetcher/search.rs:17
                    
                       1: lemmy_apub::api::resolve_object::perform
                    
                               with self=ResolveObject { q: "!projectzomboid@midwest.social", auth: Some(Sensitive) }
                    
                                 at crates/apub/src/api/resolve_object.rs:21
                    
                       2: lemmy_server::root_span_builder::HTTP request
                    
                               with http.method=GET http.scheme="https" http.host=lemmy.bulwarkob.com http.target=/api/v3/ws otel.kind="server" request_id=69004ca6-7967-48c3-a4d2-583e961e34d3 http.status_code=101 otel.status_code="OK"
                    
                                 at src/root_span_builder.rs:16
                    

                    I would be happy to remove NPM from this stack if its not too difficult to get a correctly working reverse proxy set up. The documentation doesnt give much to work with in it.