Hello! I have been struggling through a few tutorials on getting a lemmy instance to work correctly when setup with Docker. I have it mostly done, but there are various issues each time that I do not have the knowledge to properly correct. I am familiar with Docker, and already have an Oracle VPS set up on ARM64 Ubuntu. I already have portainer and an NGINX proxy set up and working okay. I have an existing lemmy instance “running” but not quite working. My best guess here would be to have someone assist with setting up the docker-compose to work with current updates/settings, as well as the config.hjson.

TIA, and I cant wait to have my own entry into the fediverse working right!

  • Jattatak@beehaw.orgOP
    link
    fedilink
    English
    arrow-up
    0
    ·
    1 year ago

    I may be mistaken in my choice of proceeding, but as many are reporting, the install guide provided docker-compose and general docker instructions dont quite seem to work as expected. I have been trying to piecemeal this together, and the Included lemmy nginx service container was completely excluded (edited out/deleted) once I had the standalone nginx-proxy-manager setup and working for regular 80,443 ->1234 proxy requests to the lemmy-ui container.

    Does the lemmy nginx have a specific role or tie in? I am still fairly new to reverse proxying in general.

    • I eat words@group.lt
      link
      fedilink
      English
      arrow-up
      0
      ·
      edit-2
      1 year ago

      yeah, nginx config for lemmy is not very straighforward. you need to mimic this:

      worker_processes  1;
      events {
          worker_connections  1024;
      }
      http {
          upstream lemmy {
              server "lemmy:8536";
          }
          upstream lemmy-ui {
              server "lemmy-ui:1234";
          }
          server {
            listen       1236;
            server_name  localhost;
      
            # frontend
            location / {
              set $proxpass "http://lemmy-ui";
              if ($http_accept = "application/activity+json") {
                set $proxpass "http://lemmy";
              }
              if ($http_accept = "application/ldr+json; profile=\"https://www.w3.org/ns/activitystreams\"") {
                set $proxpass "http://lemmy";
              }
              if ($request_method = POST) {
                set $proxpass "http://lemmy";
              }
              proxy_pass $proxpass;
      
              rewrite ^(.+)/+$ $1 permanent;
      
              # Send actual client IP upstream
              proxy_set_header X-Real-IP $remote_addr;
              proxy_set_header Host $host;
              proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
            }
      
            # backend
            location ~ ^/(api|pictrs|feeds|nodeinfo|.well-known) {
              proxy_pass "http://lemmy";
              proxy_http_version 1.1;
              proxy_set_header Upgrade $http_upgrade;
              proxy_set_header Connection "upgrade";
      
              # Add IP forwarding headers
              proxy_set_header X-Real-IP $remote_addr;
              proxy_set_header Host $host;
              proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
            }
          }
      }
      

      also - can you check if all containers are running? just do docker-compose ps in the lemmy dir.

      • Jattatak@beehaw.orgOP
        link
        fedilink
        English
        arrow-up
        0
        ·
        1 year ago

        All containers are running. I handle them with Portainer, though I build the stack from the CLI in the lemmy dir, so Portainer cant fully manage them. Reboots and logs and networking and such work fine though.

        As for the nginx config, the nginx proxy manager I use currently has all proxy-host/settings setup from the webGUI, where I use the GUI to set up the proxy host information and SSL information. I did no manual edits to any configurations or settings of the container during or after compose. Only GUI actions. When looking at the nginx.conf I replied with here (my current conf), I do not see anything related to that proxy host I created from the GUI. I am not sure if that is normal or not, or if I maybe have a wrong .conf included here.

        With that in mind, would you suggest I simply overwrite and/or add your snippet to my existing conf file?

        • I eat words@group.lt
          link
          fedilink
          English
          arrow-up
          0
          ·
          1 year ago

          try to look here for the config file:

          include /etc/nginx/conf.d/*.conf;
          	include /data/nginx/default_host/*.conf;
          	include /data/nginx/proxy_host/*.conf;
          	include /data/nginx/redirection_host/*.conf;
          	include /data/nginx/dead_host/*.conf;
          	include /data/nginx/temp/*.conf;
          

          btw, i think port in lemmy.bulwarkob.com:1236 in docker-compose is not needed for you, should be just lemmy.bulwarkob.com

          • Jattatak@beehaw.orgOP
            link
            fedilink
            English
            arrow-up
            0
            ·
            1 year ago

            I appreciate your patience and clear assistance.

            conf.d/* has two configurations that appear to be some form of default. default.conf and production.conf. production.conf is only for the admin GUI. default.conf:

            Container has a volume set /lemmy/docker/nginx-proxy-manager/data:/data

            I have those folders and more, and they DO seem to have the correct custom item.

            Specifically, in the proxy_host folder I have a configuration for the proxy host I set up (1.conf) in the GUI:

            spoiler
            
            # ------------------------------------------------------------
            # lemmy.bulwarkob.com
            # ------------------------------------------------------------
            
            
            server {
              set $forward_scheme http;
              set $server         "172.24.0.5";
              set $port           1234;
            
              listen 80;
            listen [::]:80;
            
            listen 443 ssl http2;
            listen [::]:443 ssl http2;
            
            
              server_name lemmy.bulwarkob.com;
            
            
              # Let's Encrypt SSL
              include conf.d/include/letsencrypt-acme-challenge.conf;
              include conf.d/include/ssl-ciphers.conf;
              ssl_certificate /etc/letsencrypt/live/npm-1/fullchain.pem;
              ssl_certificate_key /etc/letsencrypt/live/npm-1/privkey.pem;
            
            
            
              # Block Exploits
              include conf.d/include/block-exploits.conf;
            
            
            
            
                # Force SSL
                include conf.d/include/force-ssl.conf;
            
            
              access_log /data/logs/proxy-host-1_access.log proxy;
              error_log /data/logs/proxy-host-1_error.log warn;
            
            
              location / {
            
            
            
            
            
                # Proxy!
                include conf.d/include/proxy.conf;
              }
            
            
              # Custom
              include /data/nginx/custom/server_proxy[.]conf;
            }
            
            

            The rest of the folders are empty:

            • I eat words@group.lt
              link
              fedilink
              English
              arrow-up
              0
              ·
              1 year ago

              okay, i don’t know how npm works, could you check this tutorial to see if you have set it up similarly?

              https://youtu.be/6lQFZvCCe7U

              also - check docker-compose.yml settings to remove port for lemmy host and i think you need to set use https to true as it is provided by npm

              • Jattatak@beehaw.orgOP
                link
                fedilink
                English
                arrow-up
                1
                ·
                1 year ago

                I actually started with this tutorial a few days ago after failing the official guide. I followed it but was unable to get it running due to unexpected errors. Im guessing this tutorial is somewhat out of date. Ive made progress since using that guide though so I will see if I can pull any useful bits out of it later today and continue.

                Worst case, I could also just ditch NPM if I can get another NGINX set up in a way that you might know how to do correctly.

              • Jattatak@beehaw.orgOP
                link
                fedilink
                English
                arrow-up
                0
                ·
                1 year ago

                Hey, if you still feel like helping out :D

                Ive been through a boatload of changes today since earlier. Ive rebuilt using mostly the provided yml in the official guide, and after some tweaking, almost everything is working. The internal proxy is now working, and the containers are working amongst themselves fully as far as I can tell. I do not know how to setup a web facing reverse proxy in a way that works around the internal proxy already running (other than the already in place NPM). I turned the NPM back on, and was able to get it working to reach the site, however I cannot reach any other communities from within my site. I believe the reverse proxy NPM is just not set up right. Error message in lemmy:

                spoiler
                ERROR HTTP request{http.method=GET http.scheme="https" http.host=lemmy.bulwarkob.com http.target=/api/v3/ws otel.kind="server" request_id=69004ca6-7967-48c3-a4d2-583e961e34d3 http.status_code=101 otel.status_code="OK"}: lemmy_server::api_routes_websocket: couldnt_find_object: Request error: error sending request for url (https://midwest.social/.well-known/webfinger?resource=acct:projectzomboid@midwest.social): operation timed out
                
                   0: lemmy_apub::fetcher::search::search_query_to_object_id
                
                             at crates/apub/src/fetcher/search.rs:17
                
                   1: lemmy_apub::api::resolve_object::perform
                
                           with self=ResolveObject { q: "!projectzomboid@midwest.social", auth: Some(Sensitive) }
                
                             at crates/apub/src/api/resolve_object.rs:21
                
                   2: lemmy_server::root_span_builder::HTTP request
                
                           with http.method=GET http.scheme="https" http.host=lemmy.bulwarkob.com http.target=/api/v3/ws otel.kind="server" request_id=69004ca6-7967-48c3-a4d2-583e961e34d3 http.status_code=101 otel.status_code="OK"
                
                             at src/root_span_builder.rs:16
                

                I would be happy to remove NPM from this stack if its not too difficult to get a correctly working reverse proxy set up. The documentation doesnt give much to work with in it.

                • I eat words@group.lt
                  link
                  fedilink
                  English
                  arrow-up
                  0
                  ·
                  1 year ago

                  from the log it seems that lemmy cannot reach https://midwest.social/ - if you have more such operation timed outs - probably there is some networking issue with outgoing requests - maybe you have some kind of firewall? i can reach your instance from other direction: https://group.lt/c/bulwarkob@lemmy.bulwarkob.com

                  probably the easiest way to setup lemmy and another front facing reverse proxy is to use nginx that comes with lemmy on another port and setup simple reverse proxying with NPM to it. i myself using caddy for reverse proxying, using this config: https://join-lemmy.org/docs/en/administration/caddy.html

                  • Jattatak@beehaw.orgOP
                    link
                    fedilink
                    English
                    arrow-up
                    0
                    ·
                    1 year ago

                    I see that the instance can be reached, and posts are shown, however comments are not. I have found in the official docs that there is a config snippet for a web facing reverse proxy. https://join-lemmy.org/docs/en/administration/troubleshooting.html https://github.com/LemmyNet/lemmy-ansible/blob/main/templates/nginx.conf

                    And this config appears quite different from the “Install with Docker” config instructions: https://join-lemmy.org/docs/en/administration/install_docker.html

                    spoiler
                    
                    worker_processes 1;
                    events {
                        worker_connections 1024;
                    }
                    http {
                        upstream lemmy {
                            # this needs to map to the lemmy (server) docker service hostname
                            server "lemmy:8536";
                        }
                        upstream lemmy-ui {
                            # this needs to map to the lemmy-ui docker service hostname
                            server "lemmy-ui:1234";
                        }
                    
                        server {
                            # this is the port inside docker, not the public one yet
                            listen 80;
                            # change if needed, this is facing the public web
                            server_name localhost;
                            server_tokens off;
                    
                            gzip on;
                            gzip_types text/css application/javascript image/svg+xml;
                            gzip_vary on;
                    
                            # Upload limit, relevant for pictrs
                            client_max_body_size 20M;
                    
                            add_header X-Frame-Options SAMEORIGIN;
                            add_header X-Content-Type-Options nosniff;
                            add_header X-XSS-Protection "1; mode=block";
                    
                            # frontend general requests
                            location / {
                                # distinguish between ui requests and backend
                                # don't change lemmy-ui or lemmy here, they refer to the upstream definitions on top
                                set $proxpass "http://lemmy-ui";
                    
                                if ($http_accept = "application/activity+json") {
                                  set $proxpass "http://lemmy";
                                }
                                if ($http_accept = "application/ld+json; profile=\"https://www.w3.org/ns/activitystreams\"") {
                                  set $proxpass "http://lemmy";
                                }
                                if ($request_method = POST) {
                                  set $proxpass "http://lemmy";
                                }
                                proxy_pass $proxpass;
                    
                                rewrite ^(.+)/+$ $1 permanent;
                                # Send actual client IP upstream
                                proxy_set_header X-Real-IP $remote_addr;
                                proxy_set_header Host $host;
                                proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                            }
                    
                            # backend
                            location ~ ^/(api|pictrs|feeds|nodeinfo|.well-known) {
                                proxy_pass "http://lemmy";
                                # proxy common stuff
                                proxy_http_version 1.1;
                                proxy_set_header Upgrade $http_upgrade;
                                proxy_set_header Connection "upgrade";
                    
                                # Send actual client IP upstream
                                proxy_set_header X-Real-IP $remote_addr;
                                proxy_set_header Host $host;
                                proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for;
                            }
                        }
                    }
                    
                    

                    Do you know if I should expect to have TWO unique NGINX proxy instances (assuming I use NGINX)? One in-stack, and one separate for web facing reverse proxy? Or do I need a combination of the two configs into one instance?

                    I am going to see if I can get a caddy reverse proxy setup in the meantime and see how it performs given your configuration there.