In 2022, a Texas family filed a lawsuit against Apple for damaging their son’s hearing after an Amber Alert went off while he was wearing Airpods. According to Google, the maximum volume of phone headphones is around 105 decibels. The family are claiming that the son now requires hearing aids after his eardrum ruptured.
Is this plausible?
No not a few seconds. Ever walked near a jackhammer 130dB in the street for a few seconds? That is significantly louder. In general anything over 85dB for a significant amount of time causes damage. Concerts top out at around 110dB and you don’t see people popping eardrums there.
However if you have an ear infection so some other type of damage then maybe?
I read Texas so I’m going to assume it was due to shooting guns
it’s worth keeping in mind that dB fall off very quickly over distance and having a jackhammer right up next to your ear is different from passing a few feet beside it
Yes that’s why dB measurements are always done in open air from 1 meter distance.
edit: Headphone measurements are obviously different and are optimally measured at the distance the eardrum sits from the speaker element, with similar encasing as the headphone model offers. For In-ear, it’s a very low distance and a high level of encasing. Airpods will obviously not make 105 dB at 1 meter.
The 105 decibels is the max headphone output as it’s placed in the ear.
deleted by creator
deleted by creator
deleted by creator
I can answer this conclusively for you, ear canals do not act as neither echo chambers or are subject to resonances for audible frequencies.
If they did you would have a literal ringing in your ears.
deleted by creator
Excellent question!
The energy is typically dispersed by hairs moving, muscles moving, eardrum moving, soft tissue deforming, the hearing system behind the ear drum, your eustachian tube, the movement of the ear pod against your outer ear, and the imperfect seal of the ear pod.
105 dB is probably the max sound pressure level at optimal seal.
Also, it’s easy to verify, as resonance is literally the reason why violins, guitars and pianos have a ringing sound. Whereas regular sounds do not, because your ears don’t have audible resonances (they do have resonances in other frequencies though, just as your eye sockets, lungs and other stuff).
deleted by creator
Well said!
Sound pressure falls off as a function of the square of the distance. So if that jackhammer is 3 m away you are only receiving 11% of the sound energy that the operator is.
I think it’s very different if it is a clean digital noise. Acoustic sounds, even when loud, have a brief ramping up. Digital noise can appear like a wall from zero to 110dB in literally zero time for the ear to adjust.
The ear has tiny hairs that
raise to absorb sound and protect the hearing(see comment for a correction). I know of somebody that had a digital noise cut right through them and cause permanent hearing loss. Their hairs were flattened and no longer work. I don’t know the amplitude though.This makes no sense. For sound to actually become sound, it becomes acoustic by definition. It cannot be sound unless it moves the air or any other element that can move Soundwaves.
The source of the sound is the speaker element of headphone. I thought that detail was obvious. A speaker reproduces any signal fed into it as to best of it’s abilities. Acoustic recordings, sounds mimiking acoustic sounds, analogue or digital synthetic sounds, static noise… And even a digital pulse that goes from zero to maximum amplitude in one instant that is extremely rare or near impossible for even the most aggressive acoustic sounds. Acoustic or analogue noise is basically a sum of random frequencies all playing at once, while digital noise is a constant stream of random clean digital pulses.
Earbuds that aim to create a seal in order to isolate from external noise are dangerous in particular as there is nowhere for the sound waves to dissipate. Some parts are absorbed by the flesh of the ear canal but other parts become resonant waves that only add to the amplitude and hence the stress to the ear drum.
I had a pair of faulty ANC earbuds that would make digital pops. They weren’t necessarily louder than the music playing but damn they hurt like an unklefucker. It was like pure spike of treble cutting through the ear straight into the brain. The type of sound our ears have never encountered naturally in all their years of evolution.
Just want to chime in and mention those tiny hairs aren’t protective. They’re hair cells, named because they have tufts of stereocilia, and are what your ear actually uses to hear. When they die, you lose hearing. There are two types, inner and outer, and while the outer can influence the amount of sound detected by the inner hair cells, they can only amplify, not reduce.
The ear protects itself against loud sounds by contracting the tensor tympani and stapedius muscles, dampening the eardrum and tensing and shifting back the ossicles, the small hearing bones of the ear. This all serves to reduce the amount of force transmitted to the inner ear but takes time to occur, so it can’t protect against sudden loud noises, like a gunshot.
Oh, thanks for the correction. I seem to have misunderstood the injury when I got it described to me.
No worries! From your comments, you seem to be a bit of an audiophile. Just watch out, because audiophile forums are FULL of authoritative sounding BS.
Haha, uh oh, I will try to not take offence. I’m in no way an audiophile, though I do have a nice stereo system for listening to music rather than listening to the equipment. I did venture into doing sound based arts and installations and stuff when I was younger though so I do have some insights of how sound works. It was a “colleague” l knew back then that had the injury mentioned from an incident in a sound studio. If memory serves me right it was an accidental digital feedback loop that hit the ears like a brick wall and despite it was less than a second it was enough to cause permanent damage.
You’re almost right in so many aspects it unfortunately becomes utterly wrong.
Digital and analog noise aren’t real things, or at least not the words that are used for it. Digital and analog noise has to do with signals and frequency spectrums, not with the actual pressure differentials that are physical sound waves.
But there is a similar concept, where a thing happening can create a strong pressure wave, typically called an air blast, and are common when talking about blasting and other explosions (where the pressure wave is significant, but not really a noise). Ear pods do not create a significant pressure wave.
The ear does have tiny hairs for hearing, and they do break at sudden and loud noises (@soleinvictus explained our defence mechanisms brilliantly in another reply) and also at repeated exposure to loud noises. A breakage typically results in partial, temporary, hearing loss and “ringing in your ears”, whereas permanent death of the sensory cells leads to tinnitus, which isn’t the same as hearing damage/loss.
Sigh. Acoustic vs digitally generated noise.
Acoustic noise is what you hear outdoors from the wind, waves, leaves, whatever. An absolute myriad of tiny impact noises and scrapes and brushes and whatnot mixed together that become a dense complex texture that can be characterized as noise, although technically it is just a massive amount of single individual sounds. Acoustic noise can be found in many frequency ranges but human ears are generally good at handling with the common organic ones. Thanks, evolution!
Digitally generated noise. A sequence of random1 values that plays at the frequency rate of whatever means of digital to analog conversion is used. Digitally generated white noise consists statistically2 of all frequencies within the range of the sample rate at all volumes reproducible by the bit depth.
Digitally generated noise3 is not limited by common physics for generating sound waves4, but can be of any frequency range at any amplitude, i.e. pressure differential, within the range of the means of digital to analogue conversion and playback. That is, potentially in a spectral distribution of sound that is straight up painful for human ears.
However, the big difference is that digital noise is not a mix of endless impact noises or brushes or whatever that each follow an envelope curve, but are rather a sequence of shifting values without transitory ramping, i.e. pulses. That is, a sequence of shifts in air pressure that is literally as fast as it can possibly be.
Note that in the case of glitching5, the digitally generated noise may be limited only by the physical properties of the hardware and goes beyond what amplitudes the equipment is artificially limited to for pleasant and non harmful playback of music.
Can headphones or earbuds or loudspeakers reproduce a digitally generated noise in frequencies that are painful in amplitudes that are harmful for the human hearing apparatus? Oh, I think they do.
Anyway, I trust you are correct in your other point. It seems I used the wrong medical terminology as I was silly enough to speak in vernacular as non native English speaker without medical expertise. I expected to get away with a delirious misnomer to call years of continuous tinnitus and distorted audio perception a permanent hearing damage when it is clearly not.
My apologies for causing confusion.
1 Since attention to details are important; Most likely pseudo random generated. I know. I know.
2 Details, people.
3 Any digital noise. Audio that has been distorted until it has a frequency distribution that can be confused as pure noise, a data stream not intended for audio playback, a software/hardware glitch that flips significant bytes rapidly enough to cause a sequence of pops in such density it is perceived as a burst of noise. Whatever, use your imagination for further examples.
4 In our living conditions, on planet earth, at this time.
5 Generally speaking, not specifically to any example mentioned in this context.
I’m also not a native english speaker, but I am however a professional acoustician. I’m not opposed to you defining your terms in a way uncommon to both acoustics and audionomy, and with this explanation they’re clear, although I don’t understand how the contrast is relevant to the topic. No matter how the signal is created, it will have to be a pressure wave of amplitude and frequency, travelling through a medium, like air, to reach an ear.
However,
Can headphones or earbuds or loudspeakers reproduce a digitally generated noise in frequencies that are painful in amplitudes that are harmful for the human hearing apparatus?
Headphones and earbuds certainly can produce harmful amplitudes, that is why most of them are designed to be physically limited not to be able to. This is what the upper limit OP mentioned usually refers to, the maximum physical level the ear plug can produce. Limited by available airflow, membrane, driver, power, and seal.
Dude, I’m not trying to speak like a acoustician. At closest I’m speaking as an engineer with some knowledge of sound and acoustics from ages ago or maybe a musician, I don’t know. If you expect random people to use professional terminology to have a conversation it’s really your own mistake. I mean it in a constructive way from my own experience of taking with people on whatever I happen to know more about than them.
The contrast of a pulse as a rapid shift of air pressure and multiple ones in rapid succession of high amplitude in the context of causing damage to the inner ear? I am honestly struggling how to explain it any clearer.
Ok, I’ll give it one more go.
As you say, it is not important what or how the pulse or burst of pulses are created, but digital to analog conversion of a signal can create impulses that are literally as rapid as can be by the laws of physics that are extremely rare organically and in particular by amplitudes that you get in headphones. A burst of such impulses, I’m avoiding the previously used terminology, of random but high frequency and amplitude is like having a tiny plunger jerking like crazy in your ear like nothing the ear has ever evolved to be able to deal with.
Not because digital vs analogue, vinyl vs CD vs mp3, gold plated monster network cables or helium cooled SPDIF connectors. No magical thinking. Only changes in air pressure. Changes in air pressure of the very fast and strong variety.
But good sir, a rapid change in pressure is the same as a high frequency sound wave.
It makes little difference if it has a long duration (a tone, or noise) or short duration (a puff of air).
And the higher frequencies neither carry more energy, nor are more damaging than lower frequencies.
But you are right in that the ramp up in amplitude matters, and which could theoretically be over a very short time period either in frequency or duration with the same amount of damage. In ear plug practice this would however be limited by the electrical pulse in the driver (both wattage and Hz), and the viscosity of air flowing through the back of the speaker cavity.
A significant ramp up is what is typically meant by high maximum instantaneous sound levels, LpFMax, and those are typically long term damaging at >115 dBA, unless other risk factors are present.
(Just to be overly clear, I’m not faulting your use of language (once I understood what you meant), you’re doing admirably, and I fully understand that language is malleable and context dependent - I’m not hung up on the words.
I’m trying to get to your understanding of the physics behind it, which I read as a little muddled. It could still be due to language barrier, but what I pick up is some confusion in the differences between frequency domain and physical domain.)
On the other topics, which you seem to understand, but I’ll try to explain again to see if our models can better converge:
On the topic of the tiny plunger, this is actually how virtually all speaker elements generate sound. You have a little element, called the driver, pushing on a membrane in the frequency and amplitude you’re trying to convey. The driver and membrane can’t be infinitely flexible or have infinite plunging depth, lest they need infinite energy to push an infinite amount of air, and so are typically carefully designed to certain specs, called dynamic range (frequency/speed of driver), and sound power (amplitude of driver).
As to what the ear is designed for, it is actually very well protected against high frequencies, this is a large part of why we can’t hear higher frequencies than ~20 kHz. But you are right that it’s not made for sudden loud noises (a steep ramp up in amplitude). And although I don’t actually know, my motivated guess would be that human reaction time for the protection against sudden loud noise is at best 1/8 th of a second.
Yes, we agree on most everything and my understanding of both physics, mechanics and biology seem to agree with yours.
I guess the one main disagreement is if a pulse, either single or repeated, might potentially be more harmful than a sine wave of a single frequency. According to the teachings I’ve had, or my recollection thereof, a pulse or impulse may carry the sum (or zero sum) difference if any ramping wave, but the nature of the impulse it literally hits differently. A transition of difference in state versus a forceful immediate change. A push or a slap. Or a push and pull versus a slap and yank, should we speak of a complete cycle.
This was what I attempted to illustrate with the plunger example. If you are familiar with a plunger, you’ll know that the method of operation is not to keep a harmonious cycle, but to yank it aggressively in order to transmit a whole lot of impulse-like energy and forcefully release buildup or blockage in the pipes. My argument is that should we have two identical sinks with identical blockage and we’d manage to conduct an experiment where both plungers operate at identical frequency and amplitude, but that one plunger pumps in a harmonious cycle while the other does a pulse-like push pull, the latter would yield more successful results. Hence my conclusion is that despite the state being identical before and after, theoretically the amount of energy may be the same, there is a difference in how the energy is transferred depending on the curvature of the actuation on the plunger. Or the speaker cone. Though through air instead of water and air compress while water doesn’t. But still.
So the frequency of a repeated waveform and the shape of the waveform are not interchangeable. I’m sound the frequency carries the root tone, the shape carries the multiples. A perfect impulse (or other digitally generated waveforms) carry in theory an infinite amount of frequencies. Again, carry may be a misnomer depending on the discipline and of course the perfect is unobtainable so in practice the frequency spectrum is limited to one bandwidth and spectrum or another. Not that really had any bearing in our discussion.
Finally, I disagree with the argument of the engineering in headphones. Those limits are with respects of quality of sound reproduction. They are not a guarantee of hard limit of potential output and not intended to be. I don’t engineer speakers but it’s quite common paradigm in engineering in general that you benefit in quality and reliability should you accept a modest degree of unused overhead. Mistakes and bugs happen and it is especially vulnerable when it is reliant on hardware and software in the earpiece itself, as with my personal experience of faulty earbuds that emitted bursts of painful high frequency noise despite playback being of moderate volume. There are no intermediate steps of filtering, as with analogue gear, so should a faulty component cause a pop, it may well do so from the one extreme to the other.
I apologize for my frustration. I’ve been experiencing lately that I try to communicate one thing and the recepient keep projecting it into their own frame of reference and insist I’m talking of something that I’m not. I’m a bit touchy and I’m sorry about that.
deleted by creator
The 105 decibels is the maximum output physically possible by the headphones. The software can limit max output to 80-85db but Amber Alerts bypass this, so 105 decibels is possible.
That dB level isn’t crazy high, but rupturing your eardrum typically has more to do with sound pressure level (SPL) which very well might be possible when you’re talking about little speakers as close to the eardrum as possible and creating a partial air lock. That and like other people have said, you don’t need to rupture anything to get some serious tinnitus.
https://www.nidcd.nih.gov/health/noise-induced-hearing-loss
Apple did add the option to change the tone volume after this incident. So there must be something here. Also, it’s unlikely that the volume was only 105 db. But from most medical sources, typically up to 110 db is acceptable and may only cause hearing loss after decades. A siren hits up to 120-130 db.
Punctured ear drums usually occur because of pressure differences and not just loud sounds, so there may be more here than just loudness as AirPods do change the pressure around the ear (the Pro’s actually have an exhaust to alleviate the pressure build up from the sound and the seal around the ear).
Yeah, I’d say it’s 100% plausible.
Police and emergency responder sirens are about 120 dB at 1 meter. The duration of exposure is similar to an Amber Alert tone. I don’t see people suing cities for ruptured eardrums from exposure to sirens.
Long-term exposure over 85 db can cause hearing loss, but rupturing an eardrum takes a lot higher intensity - 165+ dB. That’s a shot from a large caliber weapon from a few feet away. I know it can rupture an eardrum because it ruptured mine (shooting partner emptied his 50 cal Desert Eagle next to me before I got my protection on).
eta: sorry - replied to wrong comment.
Sound pressure falls off as a function of the square of the distance. So if that jackhammer is 3 m away you are only receiving 11% of the sound energy that the operator is.
To rupture? I would be highly dubious of that claim. Without some kind of factor weakening or otherwise changing things, there’s no headphones out there that could do that, even with a perfect seal.
Damage hearing, absolutely. But that’s a far cry from rupturing an ear drum. That’s hard enough to do on purpose. I’ve seen people try to clap hands on the ears to attempt a rupture and never seen it work.
I’ve had some big fucking handguns go off near my ear without a rupture. Couldn’t hear shit for days in one case, but no injury to the membrane itself. Fuck, I’ve been right near the stage for Iron Maiden and was fine the next day.
Eardrums are hard to rupture at all, much less without a very good seal and large amounts of air moving.
Is there any actual evidence in this case? Is it easy in Texas to fake a claim like this?
No idea. Don’t know anything about the case, nor any texas specific lawsuit issues.
It’s plausible since humans probably have different sensitivities for their ears. I live in a city with a train that goes right through the middle of it. It’s got no guard rails and if you’re driving you could reach out and touch it if you wanted. They are required to blast their horns every X meters for safety at max decibels of 110. The closest I’ve been is 3 or 4 meters when it went off. I didn’t get any hearing damage from it though and I haven’t heard of anyone else getting any. That could be related to how close the source of sound was though.
So I would conclude with it’s probably unlikely that was the sole cause as people are around trains all the time. Plus I’m sure plenty of people get amber alerts through there.
Not typically. Instantaneous noise levels of Lp 115 dBA have a significant risk of permanent injury, and long term exposure above Lp,den 50 dBA (especially at night) will shorten your life.
But hearing damage is cumulative, if you go about shooting guns without protection or other noise pollution, you might get injured at lower levels.
I spent 6 months living in a tent 200 yards away from the centerline of a runway with large 4 engine aircraft landing regularly. I have a wicked case of tinnitus, hearing aids, and no ruptured ear drums.
