Me again. The guy with the NIC problem from before.

I installed the Rx590 and it shows up in lspci as an RTX 2070. I was hoping it was just Proxmox not having drivers or something, but when I pass it into the Hackintosh it’s meant for, it shows as NVIDIA there too:

Now I did get the Rx590 off eBay, but I’m it was listed as and looks like this: https://www.powercolor.com/product?id=1551768831

So I think it is actually a Rx590.

This is lspci. 01:00.0 is a RTX 3060. 03:00.0 is the Rx590.

00:00.0 Host bridge: Intel Corporation Device a740 (rev 01)

00:01.0 PCI bridge: Intel Corporation Device a70d (rev 01)

00:02.0 VGA compatible controller: Intel Corporation Raptor Lake-S GT1 [UHD Graphics 770] (rev 04)

00:14.0 USB controller: Intel Corporation Alder Lake-S PCH USB 3.2 Gen 2x2 XHCI Controller (rev 11)

00:14.2 RAM memory: Intel Corporation Alder Lake-S PCH Shared SRAM (rev 11)

00:15.0 Serial bus controller: Intel Corporation Alder Lake-S PCH Serial IO I2C Controller #0 (rev 11)

00:16.0 Communication controller: Intel Corporation Alder Lake-S PCH HECI Controller #1 (rev 11)

00:17.0 SATA controller: Intel Corporation Alder Lake-S PCH SATA Controller [AHCI Mode] (rev 11)

00:1a.0 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #25 (rev 11)

00:1b.0 PCI bridge: Intel Corporation Device 7ac4 (rev 11)

00:1c.0 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #2 (rev 11)

00:1c.4 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #5 (rev 11)

00:1d.0 PCI bridge: Intel Corporation Alder Lake-S PCH PCI Express Root Port #9 (rev 11)

00:1f.0 ISA bridge: Intel Corporation Z690 Chipset LPC/eSPI Controller (rev 11)

00:1f.3 Audio device: Intel Corporation Alder Lake-S HD Audio Controller (rev 11)

00:1f.4 SMBus: Intel Corporation Alder Lake-S PCH SMBus Controller (rev 11)

00:1f.5 Serial bus controller: Intel Corporation Alder Lake-S PCH SPI Controller (rev 11)

00:1f.6 Ethernet controller: Intel Corporation Ethernet Connection (17) I219-V (rev 11)

01:00.0 VGA compatible controller: NVIDIA Corporation GA106 [GeForce RTX 3060] (rev a1)

01:00.1 Audio device: NVIDIA Corporation GA106 High Definition Audio Controller (rev a1)

02:00.0 Non-Volatile memory controller: Sandisk Corp Western Digital WD Black SN850X NVMe SSD (rev 01)

03:00.0 VGA compatible controller: NVIDIA Corporation TU106 [GeForce RTX 2070] (rev a1)

03:00.1 Audio device: NVIDIA Corporation TU106 High Definition Audio Controller (rev a1)

03:00.2 USB controller: NVIDIA Corporation TU106 USB 3.1 Host Controller (rev a1)

03:00.3 Serial bus controller: NVIDIA Corporation TU106 USB Type-C UCSI Controller (rev a1)

04:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8125 2.5GbE Controller (rev 05)

05:00.0 Non-Volatile memory controller: Micron/Crucial Technology Device 5415 (rev 01)

06:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca)

07:00.0 PCI bridge: PLX Technology, Inc. PEX 8724 24-Lane, 6-Port PCI Express Gen 3 (8 GT/s) Switch, 19 x 19mm FCBGA (rev ca)

  • tal
    link
    fedilink
    English
    arrow-up
    7
    ·
    edit-2
    5 months ago

    Well, there’s the obvious answer, that you actually have an Nvidia card. I think I’d probably consider taking a look at the card and at photos of new cards of both models and see which it looks like.

    From a software standpoint, I have a hard time believing that you’re misdetecting the type of card.

    I don’t know anything about Proxmox, but I understand that it’s some sort of platform used to virtualize systems. It apparently, based on a quick search, has some kind of support for Nvidia passthrough, called vGPU. If you’re looking from inside a virtualized environment, is it possible that you’re looking at a virtual GPU? That seems like a long shot, since I assume that if your GPU is AMD, that a virtual Nvidia GPU would be non-functional – it doesn’t look like this vGPU thing can use a host AMD GPU-- but I can’t think of any other way that you’re going to wind up detecting an Nvidia card that you don’t have.

    • TMP_NKcYUEoM7kXg4qYe@lemmy.world
      link
      fedilink
      English
      arrow-up
      1
      ·
      5 months ago

      It’s easy to misdetect the card. You just need to flash broken firmware on it that pretends it’s a different card. This is definitely not a 2070 because 1) Powercolor does not make nVidia cards and 2) RTX 2000 GPUs don’t have DVI ports.