Which cut line is correct? Don’t know, both sides are screwed twisted beyond belief. This is the start cut, the first 2.5" inches are for kid’s projects… Another chance at loosing a finger or two. The worse part is that these were the best picks of the day. Every other 2X6 (1.5x5.5 for the non-retarded among us) were worse splintered, bent, twisted. They need to dry the wood slowly in a well spaced stack. I wouldn’t wish any of this wood on anyone for anything.
I used to love Philips head screws until one day I tried torx. I’m never going back. I have some Philips around but you know the bits get worn and that damages screws. Sometimes you can’t get the screws out. I just finished a large concrete wall project with all the forms held by the same 20 or so T25 screws. Its crazy how good and reusable they are.
Torx FTW. I only use Phillips in situations where Torx aren’t available. They still aren’t easily available in as many varieties as Phillips.