Me and my friend were discussing this the other day about how he said RAID is no longer needed. He said it was due to how big SSDs have gotten and that apparently you can replace sectors within them if a problem occurs which is why having an array is not needed.
I replied with the fact that arrays allow for redundancy that create a faster uptime if there are issues and drive needs to be replaced. And depending on what you are doing, that is more valuable than just doing the new thing. Especially because RAID allows redundancy that can replicate lost data if needed depending on the configuration.
What do you all think?
Yeah and Titanic was unsinkable.
If the controller in your SSD fries, it doesn’t matter how many unused gigabytes your SSD has got for relocating bad sectors. It is still fried. For you, that data is forever gone.
This is why you have redundancy. Full redundancy. You can go for RAID1, one disk die and you still have no data loss, or go bananas with RAID6, two full disks can die and you’re still going strong.
Ps. Spinning harddrives have had hidden sectors used for relocation of bad sectors for ages. It’s nothing new. If you have to much time on your hand, Google harddrive hidden sectors nsa.
Unlike hdd, I never experienced graceful disk failures on ssd. Instead, they just randomly decided to die at the most inconvenient time. Raid 1 saved my hide a couple times now from those ssd failures.
Yep. While it has been decades since I had a home SSD failure. But I have had 2 SSD failures in the last 10 years in server hardware. In the first case it was RAID striped and I needed to restore from backup. In the second case it was part of a raid 1 array and I just requested a replacement and got on with my day.
In my house, I have non raid SSDs on my own PC. But important stuff is on my NAS made up of 4xHDD drives in raid 5 (that also has the important folders backed up to an encrypted cloud).
RAID still has a place in an overall data security solution. Especially for servers that you want to keep up.
…absolutely, positively, super false. I work in a sector where we’re constantly dealing with huge capacity enterprise SSDs - 15 and 30 terabytes at times. Always using RAID. It’s not even a question. Not only can you have controller malfunctions, but even though you’ve got what’s known as “over provisioning” on the SSDs, you still need to watch out for total disk failures!
Reminds me of the days that cdroms were brand new and advertised like indestructible, with photos of elephants walking over it. Having said that I assume SSD disks can break like other hard disks can break, and in that case RAID can save a lot of time to get a computer back up especially when a lot of data is involved.
Had a microsd card literally break in half last week. They’re definitely not invincible
Yeah they sometimes get touted as that
Was that a SteamDeck? 🙃
3ds
Ok. Coz it is really common for SteamD users to forget removing SD card when didassembling device. Lots of cards have been lost
Actually that’s kinda what happened. I inserted the card to test if it was working before I put the bottom back on, but forgot to take it out. When I started screwing the bottom back on I heard a snap and that’s when I realized…
Definitely a lot of data lost, but most of it is redownloadable.
Funny. Growing up, I was taught to be extra careful with CDs because the moment you look at them wrong, all your data gets corrupted.
SSDs still have component bottlenecks that can kill the whole drive, same as hard drives.
Also, 3-2-1 is far superior to RAID, but having RAID on top of that is nice.
- Maintain three copies of your data: This includes the original data and at least two copies.
- Use two different types of media for storage: Store your data on two distinct forms of media to enhance redundancy.
- Keep at least one copy off-site: To ensure data safety, have one backup copy stored in an off-site location, separate from your primary data and on-site backups. https://www.veeam.com/blog/321-backup-rule.html
3-2-1 is for backup, RAID is also for availability, eg your domain server not going down in case of drive failure. good point though.
People say RAID isn’t backup, but I’ve never understood that. Yes it’s only one medium and it’s probably not off-site, but if you’ve got an off-site copy in a different medium, why doesn’t a single RAID 5 count as 2 copies of your data to add up to get the 3 in 321 backup?
Media failure isn’t the only reason to back up. If you delete a file on a RAID array, it’s gone on all disks. If you need to recover that deleted file, you can’t recover from RAID. The same goes for formatting/damage of the file system, recovery from something wrong inside a database, etc.
Suppose you’re hit by a ransomware attack and all the data on your NAS gets encrypted. Your RAID “backup” is just as inaccessible as everything else. So it’s not a backup. A true backup would let you recover from the ransomware attack once you have identified and removed the malware that allowed the attack.
I really, really liked @atimehoodie@lemmy.ml’s answer, because even as I was reading it, I was thinking of things that they could have said—but didn’t—which would have been easily rebutted. Those things fell into two basic categories: malware, and environmental effects.
As I understand it, malware is an issue with any online backup system, whether that’s a RAID or just a second external hard drive. So I don’t really think it works as an answer to why RAIDs specifically don’t qualify as backup.
A well thought out and implemented backup system, along with a good security setup is how you deal with malware. If backups won’t protect you from malware then you’re doing backups wrong. A proper backup implementation keeps a series of full backups plus incremental backups based on those full ones. So say your data doesn’t change very often, then you might do a full backup once a month and incremental ones twice a week. You keep 6 months of the combinations of full & incrementals, you don’t just overwrite the backups with new ones.
If you’re doing backups like that and you suffer a malware attack then you have the ability to recover data as far as 6 months ago. The chances you don’t discover malware encrypting your data for 6+ months is tiny. If you’re really paranoid then you also test recovering files from random backups on a regular basis.
My employer has detected and blocked multiple malware attacks using a combination of the above practices plus device management software that can detect unusual NAS activity and block suspect devices on our networks. Each time our security team was able to identify the encrypted files and restore over 99% from backups.
RAID is resiliency, but not a backup. It doesnt hold a previous dates version, it doesn’t protect against accidental deletion. Nor does it protect against changes to files.
Many causes of data loss affect all RAID drives equally from accidental deletion over power surges, fire, water damage, theft,…
I really, really liked @atimehoodie@lemmy.ml’s answer, because even as I was reading it, I was thinking of things that they could have said—but didn’t—which would have been easily rebutted. Those things fell into two basic categories: malware, and environmental effects.
Environmental effects like water damage and theft are a problem for any local storage, regardless of the technology. If it’s a RAID, or an external USB drive, or even a NAS in your closet. The power surge is probably the best example of RAID not being backup, since it’s very possible that one device might receive the surge but not the other, if they’re connected to different outlets. But as for the other ones? Eh, I don’t really buy it.
I have literally lost all data on a RAID6 of 12 drives since the power distributor in the server (the bit between the redundant PSUs and the rest of the system) got fried and took 5 out of the 12 drives with it.
What if the RAID 5 gets encrypted with ransomware, how many backups are there?
This is a total load of bullshit, your friend is wrong
its not about the individual drive… its about total drive failure… if that ssd’s controller dies it doesnt matter if it has extra data sectors.
that said, I moved on from raid by mirroring multiple , unraided NAS devices for redundancy with data stored specifically on the drives in such a way as to eliminate cross disk logical volumes.
you can replace sectors within them if a problem occurs
That won’t help you if sector where your data is located dies!
I don’t think the internal wear-leveling and overprovisioning of SSDs can or should be able to replace raid. Disregarding a dead sector without losing capacity is great, but it won’t help you when (for example) the controller dies.
Depending on the amount of data you’re storing SSDs also might be too expensive.
The only exception is maybe Raid 0 in a normal PC. Here it’s probably better to just get one disk for each logical drive.
RAID0 has always been playing with fire
- Bit rot is still a problem, you need a high integrity file system and or RAID to avoid that
- Full drive failure is still about as likely, IE the main reason for RAID of multiple drives in the first place.
A good read on the problems with SSDs SSD 101: How Reliable are SSDs?
I found this article from the one you posted. It is crazy think DNA can be used for storage one day.
I do recall google apparently stopped using raid in some data centres, but it was because they had whole-machine redundancy.
RAID is probably redundant for some of the uses it used to have, like optimising read performance by using many drives (SSD is fast) and honestly I suspect that SSDs are probably more reliable as they don’t have a bunch of platters and bearings and screaming rotational speeds.
So if you needed it for a base level of reliability, an SSD on its own may have exceeded that.
I suspect there are still uses for drive redundancy in some high availability setups… although your friend might be right. If the likelihood of drive failure is lower than other parts in the machine and you need high redundancy for availability it might make more sense to replicate the whole machine rather than the drives.
It’s possible redundancy specifically for the drives was an artifact of unreliable drives back in the day 🤔 they might have a point! I think it’s likely still useful at times though.
I’d rather hotswap a drive than set up a new server, even if it’s a less likely scenario.
I wholeheartedly agree with you. It is worth noting that a lot of the use cases of RAID can now be solved via software, but there are some places where hardware RAID still shines, such as redundancy. Yes, software also can provide redundancy, but I still haven’t seen a software solution that is equivalent to a proper RAID controller with a dedicated battery to keep the I/O buffer alive in case of hardware failure. That one has saved me a few times.
Source: I’m in charge of 6 storage clusters at work. Beegfs is what takes care of the actual clustering, resulting in each cluster clocking in at 1.2PB of storage. Each cluster consists of four machines with three storage volumes each.
Each storage volume consists of 12 drives in a RAID6 configuration.I can yank faulty drives and toss them out and have them replaced with no downtime. I know some like to set up hot spares, but I for one don’t. I’ve even had entire servers die on me, and thanks to additional redundancy provided by beegfs, I’ve changed motherboard with no cluster downtime either. Just move the drives over to an identical machine (yes, each cluster has a dedicated spare machine), import the RAID, and you’re good to go.
a dedicated battery to keep the I/O buffer alive in case of hardware failure
Unless I’m misunderstanding, that sounds like you’re worried about the write hole, which RAIDZ doesn’t have
It’s mostly a matter of making sure any writes that are interrupted part way through (power failure, etc) are kept alive until the issue has been resolved. The raid controller caches everything until the write is complete.
It’s not so much about disks being out of sync, but more about preventing data loss.
RAIDZ is copy-on-write, and will notice and correct parity discrepancies if interrupted partway through. Doesn’t help if you don’t get at least one copy of the data written, but I’d take RAIDZ and a UPS over a hardware raid any day
And at the scale I’m operating, I’ll take hardware raid over raidz any day. I did some performance benchmarking when initially building these clusters, and beegfs really doesn’t like raidz.
I use raidz at home, though.
That’s fair. My biggest concern with a hardware raid is the risk having trouble finding compatible hardware if/when a controller dies, but I expect that’s not really an issue at larger scale; you probably buy hardware in bulk and have replacements on hand
Higher end Samsung ssds were dying a lot faster than they should. I dont know what drugs your friend is on thinking they cant fail but theyd better have enough for the rest of the class.
He said it was due to how big SSDs have gotten and that apparently you can replace sectors within them if a problem occurs which is why having an array is not needed.
Buying SSDs with the same capacity as my NAS with 70TB (after raid 6) would cost almost tripple of what my setup (including the NAS) costs.
So unless you shit money, SSDs are not an option for anything with a decent capacity.
due to how big SSDs have gotten and that apparently you can replace sectors within them if a problem occurs
True, but that’s something an SSD does internally and is just there to prolong the lifespan.
You definitely still want a raid if you want to keep a system running during a disk failure. No amount of extra sectors and wear leveling will safe you from that
yeah but if SSD failing is now less likely that other parts of the machine it might be better to focus on a redundant server to fail over to… it’s an interesting thought. RAID isn’t obsolete I don’t think but it’s an interesting question
Hmm but in a server enviroment wouldnt it be possible for ssd to reach their wear level much faster and therefor fail due to that ( depending on the workload of course ).
yeah true. I guess what I’m saying is the considerations probably have changed, I seriously doubt RAID is no longer useful though.
