Hi everyone, I ran apt full-upgrade last month and accidentally deleted a couple packages that weren’t supposed to be removed, due to me not paying enough attention. I could recover most of the system just fine, since most of the missing features and related packages were obvious to me. However, I still couldn’t figure out why transparency is not working on KDE, both in Wayland and X. I suspected it could be a missing compositor, but libwayland and libqt6waylandcompositor6 (and related packages) are all installed (and that wouldn’t explain why it isn’t also working on X).

I have attached a screenshot to illustrate what I mean.

I would appreciate if anyone could help me figure out what package might be missing that is causing this issue. Thanks in advance!

EDIT: Thank you so much everyone! I finally solved my problem. I just had to replace libqt5quick5-gles by libqt5quick5 (non gles version).

Commandline: apt install libqt5quick5
Install: libqt5quick5:amd64 (5.15.10+dfsg-2+b2)
Remove: libqt5quick5-gles:amd64 (5.15.10+dfsg-2+b2)
  • lurch (he/him)@sh.itjust.works
    link
    fedilink
    arrow-up
    34
    arrow-down
    3
    ·
    7 months ago

    if you don’t have any backups (like normal people do), check the logs of the package manager. for example /var/log/apt/history.log should have a neat list of operations with timestamps and packages.

    • Raspin@lemmy.ml
      link
      fedilink
      arrow-up
      17
      ·
      7 months ago

      Most people don’t really get out their way to set up backup manually. Either system should try really hard to avoid corruption or implement a recovery system. Ideally both.

      • Ephera@lemmy.ml
        link
        fedilink
        arrow-up
        7
        ·
        7 months ago

        Well, the Linux world is moving towards btrfs and zero-setup automatic snapshots. Those would have made it trivial to rollback a broken update like that. Unfortunaly, it’s still going to take a few years before Debian makes the move…

        • jack@monero.town
          link
          fedilink
          arrow-up
          1
          arrow-down
          2
          ·
          7 months ago

          Unfortunaly, it’s still going to take a few years before Debian makes the move…

          Debian is as traditional as it gets, change comes slooowly. I don’t see why it’s still so popular

      • lurch (he/him)@sh.itjust.works
        link
        fedilink
        arrow-up
        1
        ·
        7 months ago

        You don’t need to get out of your way. You can, for example, just tar --one-file-system, clonezilla or rsync or maybe even drag and drop copy all your important file systems on a USB HD, USB stick or cloud storage that you then check and unplug/unmount.

        This is very easy and can run in the background while you do some other stuff. Even if the backup isn’t good and for example doesn’t have proper permissions, because you drag and drop copied, it will have the info required to reinstall and restore the exact system you had at the time of the backup.

    • buffy@lemmy.worldOP
      link
      fedilink
      English
      arrow-up
      8
      ·
      7 months ago

      I do store regular backups of this machine, but not of /var. I can always reinstall Debian (or whatever other distro), while keeping other relevant configs intact (stored in the backups) and not lose any critical data.

      I commented below that I did check /var/log/dpkg.log, but it didn’t help much due to the high number of packages removed that day.

      At this point I am more curious to learn more about KDE and what is causing the problem, since other desktop environments (I installed mate) seem to work fine.

    • buffy@lemmy.worldOP
      link
      fedilink
      arrow-up
      3
      ·
      7 months ago

      The Gentoo sub had such a nice subtitle because it is indeed accurate! Definitely one of the things I like the most about “flexible” distros.

      “Gentoo Linux: Because you like it when the power is in your hands”

  • kyoji@lemmy.world
    link
    fedilink
    arrow-up
    14
    arrow-down
    1
    ·
    7 months ago

    Are you on BTRFS? If so maybe you could restore to a snapshot prior to the apt upgrade?

    I’m not very familiar with Debian, but perhaps there are official “groups” of packages that comprise a set of softwares, like KDE. Perhaps you could re-install that group, if it exists?

    You could also create a new user, log in as that user, and see if the issue persists. If so then you’ll know it’s a system wide issue. If not, then maybe you could migrate to the new user?

    Good luck!

    • buffy@lemmy.worldOP
      link
      fedilink
      arrow-up
      12
      ·
      edit-2
      7 months ago

      Sadly I am not using BTRFS for my root directory on this specific system. If I end up deciding to reinstall, I will definitely go back to BTRFS to avoid such problems.

      Debian actually has a KDE group named kde-full. I reinstalled it but the issue persists, which was honestly surprising to me.

      ~$ sudo apt install kde-full
      Reading package lists... Done
      Building dependency tree... Done
      Reading state information... Done
      kde-full is already the newest version (5:147).
      0 upgraded, 0 newly installed, 0 to remove and 87 not upgraded.
      

      The new user idea was really clever, thanks for the suggestion! I will try that now and see.

      Edit: the new user also presents the same problem. Actually, it makes sense, since SDDM is affected as well (I should have mentioned that before).

      • Ephera@lemmy.ml
        link
        fedilink
        arrow-up
        5
        ·
        7 months ago

        Debian doesn’t have package groups in that sense. kde-full is just a package which depends on the other KDE packages.
        So, if you tell it to install kde-full, it’ll just check that, yes, it does have the kde-full package installed, whether all the dependencies are fulfilled or not.

        You can try doing apt --fix-broken install (without specifying a package), maybe that will pull in the missing dependency.
        Or you can reinstall: apt reinstall kde-full

        • buffy@lemmy.worldOP
          link
          fedilink
          arrow-up
          2
          ·
          7 months ago

          Thanks for the tip! However, I tried apt reinstall kde-full and apt --fix-broken install, but no packages were installed and (unsurprisingly) the problem still persists.

          • Ephera@lemmy.ml
            link
            fedilink
            arrow-up
            2
            ·
            7 months ago

            Hmm, then I’m guessing, it’s not a missing package. It kind of doesn’t quite make sense anyways, as KDE Wayland can’t be run without a compositor.

            Maybe the installed Breeze theme is broken. If you install a different Plasma theme in the System Settings, does that give you transparency?

            • buffy@lemmy.worldOP
              link
              fedilink
              arrow-up
              1
              ·
              7 months ago

              I agree with that. I suspect you might be right. SDDM (Breeze) is also weird with transparency. However, I just installed materia-kde but unfortunately the problem persisted (screenshot attached). Before that, I ran apt purge kde* plasma* libkf* and apt install kde-full. That too didn’t solve my problem.

        • buffy@lemmy.worldOP
          link
          fedilink
          arrow-up
          2
          ·
          7 months ago

          Thanks for the recommendation! I will definitely do it when I eventually install some other distro in the future.

      • billgamesh@lemmy.ml
        link
        fedilink
        arrow-up
        2
        ·
        7 months ago

        you installed it without uninstalling first? have you tried an apt purge to get rid of related conf files, then reinstall kde?

        • buffy@lemmy.worldOP
          link
          fedilink
          arrow-up
          1
          ·
          7 months ago

          You are absolutely right. I just tried apt purge kde* plasma* libkf* and apt install kde-full followed by a reboot. But sadly, the problem persists.

  • communism@lemmy.ml
    link
    fedilink
    arrow-up
    10
    ·
    7 months ago

    How did you install KDE in the first place? If you uninstalled too many packages for the logs to be of use, just reinstall KDE however you installed it

    • buffy@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      7 months ago

      If I am not mistaken, I used a Debian KDE live image from the official repository then switched the mirrors from Bookworm to Sid. The system went months without a single issue, then this happen.

      Your suggestion will actually be my solution of choice if everything else fails: reinstall / and import relevant files from a backup that I already have.

    • KillingTimeItself@lemmy.dbzer0.com
      link
      fedilink
      English
      arrow-up
      11
      ·
      7 months ago

      dont install the meta package unless you used it on install. It can cause shenanigans if you aren’t careful, especially with application meta packages.

      Or do, im not your mom lol.

          • buffy@lemmy.worldOP
            link
            fedilink
            arrow-up
            2
            ·
            7 months ago

            Tasksel seems to be correctly set,

            ~$ tasksel --list-tasks
            i desktop       Debian desktop environment
            u gnome-desktop GNOME
            u xfce-desktop  Xfce
            u gnome-flashback-desktop       GNOME Flashback
            i kde-desktop   KDE Plasma
            u cinnamon-desktop      Cinnamon
            u mate-desktop  MATE
            u lxde-desktop  LXDE
            u lxqt-desktop  LXQt
            u web-server    web server
            u ssh-server    SSH server
            i laptop        laptop
            

            I tried apt reinstall kde-full, but unfortunately nothing changed.

    • buffy@lemmy.worldOP
      link
      fedilink
      arrow-up
      2
      ·
      edit-2
      7 months ago

      Thanks! Some packages were installed, but it didn’t solve it yet (even after a reboot).

      ...
      Install: orca:amd64 (46.0-1, automatic), libpcaudio0:amd64 (1.2-2+b2, automatic), speech-dispatcher-audio-plugins:amd64 (0.11.5-4, automatic), python3-brlapi:amd64 (6.6-5, automatic), xbrlapi:amd64 (6.6-5, automatic), speech-dispatcher-espeak-ng:amd64 (0.11.5-4, automatic), libsonic0:amd64 (0.2.0-13, automatic), sound-icons:amd64 (0.1-8, automatic), python3-speechd:amd64 (0.11.5-4, automatic), libespeak-ng1:amd64 (1.51+dfsg-12, automatic), python3-louis:amd64 (3.29.0-1, automatic), x11-session-utils:amd64 (7.7+6+b1, automatic), xkbset:amd64 (0.8-1, automatic), task-desktop:amd64 (3.75, automatic), libdotconf0:amd64 (1.3-0.3+b1, automatic), xorg:amd64 (1:7.7+23, automatic), perl-tk:amd64 (1:804.036+dfsg1-2+b1, automatic), x11-apps:amd64 (7.7+11+b1, automatic), speech-dispatcher:amd64 (0.11.5-4, automatic), espeak-ng-data:amd64 (1.51+dfsg-12, automatic), task-kde-desktop:amd64 (3.75), xinit:amd64 (1.4.2-1, automatic)
      End-Date: 2024-03-26  17:42:41
      
    • buffy@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      7 months ago

      I did check it, yes, but the page doesn’t appear to be relevant or contain much information. Another comment above (or below) mentioned that KDE Plasma can’t run without a compositor.

  • DeaDSouL@lemmy.ml
    link
    fedilink
    arrow-up
    2
    ·
    7 months ago

    Next time if you’re using btrfs, try to use Snapora, it’s one time use. It will help you with situations like this.

    Snapora was being written specifically for Fedora. Yet you can implement the concept for Debian.

    • buffy@lemmy.worldOP
      link
      fedilink
      arrow-up
      1
      ·
      7 months ago

      I will very likely migrate to BTRFS on my next install. I’m reading Snapora’s repo now, looks like an awesome tool. Thanks for the tip!