• Brayd@discuss.tchncs.de
    link
    fedilink
    English
    arrow-up
    17
    ·
    8 months ago

    I had everything behind my LAN, but published things like Nextcloud to the outside after finally figuring out how to do that even without a public IPv4 (being behind DS-Lite by my provider).

    I knew about Cloudflare Tunnels but I didn’t want to route my stuff through their service. And using Immich through their tunnel would be very slow.

    I finally figured out how to publish my stuff using an external VPS that’s doing several things:

    • being a OpenVPN server
    • being a cert server for OpenVPN certs
    • being a reverse proxy using nginx with certbot

    Then my servers at home just connect to the VPS as VPN clients so there’s a direct tunnel between the VPS and the home servers.

    Now when I have an app running on 8080 on my home server, I can set up nginx so that the domain points to the VPS public IPv4 and IPv6 and that one routes the traffic through the VPN tunnel to the home server and it’s port using the IPv4 of the VPN tunnel. The clients are configured to have a static IPv4 inside the VPN tunnel when connecting to the VPN server.

    Took me several years to figure out but resolved all my issues.

    • llii@feddit.de
      link
      fedilink
      English
      arrow-up
      4
      ·
      8 months ago

      What benefit does it have instead of getting a dynamic DNS entry and port forwarding on your internet connection?

      • Brayd@discuss.tchncs.de
        link
        fedilink
        English
        arrow-up
        11
        ·
        8 months ago

        With DS-Lite you don’t have a public IPv4. Not a static one but also not a dynamic one. The ISP just gives you a public IPv6. You share your IPv4 address with other users. This is done to use less IPv4s. But not having a dynamic IPv4 causes you to be unable to use DynDNS etc. It’s simply not possible.

        You could publish your stuff via IPv6 only but good luck accessing it from a network without IPv6.

        You could also spin up tunnels with SSH actually between a public server and the private one (yes SSH can do stuff like that) but that’s very hard to manage with many services so you’re better of building a setup like mine.

        https://www.juniper.net/documentation/us/en/software/junos/nat/topics/topic-map/security-ipv6-dual-stack-lite.html