• HappycamperNZ@lemmy.world
    link
    fedilink
    arrow-up
    26
    arrow-down
    1
    ·
    9 months ago

    Tangently related- im a big fan of the easiest 10%. Effectively, the easiest 10% of change does just as much as the hardest 10%.

    Want to use the dryer less? Big stuff on line, little stuff in the dryer. That kind of thing.

    Chucking a solar panel on your roof gets you 10% of the way there in a weekend then forget about it for 5 years.

    • Grass@sh.itjust.works
      link
      fedilink
      arrow-up
      4
      ·
      9 months ago

      I feel like I read somewhere about someone routing the Arizona air from outside into a dryer intake and running it without the heat and saving a big chunk in electricity too. It’s too bad I live in rain and humidity town.

    • LordKitsuna@lemmy.world
      link
      fedilink
      arrow-up
      3
      ·
      9 months ago

      Well, not to be that guy but given your specific example of a dryer there is a way you can get over half the way there. Get a heatpump dryer. They use 1/4th the amount of electricity as a standard electric dryer and can literally be plugged into a standard 110v 15A outlet they don’t need the big ass 220v 50a plug. Heavy items like thick beach towels take a bit longer but otherwise they function identically

      • HappycamperNZ@lemmy.world
        link
        fedilink
        arrow-up
        5
        ·
        edit-2
        9 months ago

        Different country, all our dryers and appliances run off mains power - 220v 10amp. The big issue is that they can’t be mounted upside down, so we can’t have one.

        • LordKitsuna@lemmy.world
          link
          fedilink
          arrow-up
          2
          ·
          9 months ago

          That’s definitely a unique mounting circumstance, I’m very curious why specifically upside down mounting

          • HappycamperNZ@lemmy.world
            link
            fedilink
            arrow-up
            2
            ·
            9 months ago

            Because you put them above the washing machine, and flip them upside down so you can reach the buttons - its a space thing. They even have mounting brackets they come with and the front panel removes so you can turn it upright. I never did though, mine are upside down. But I don’t care.

            But yeah, means we can’t use heat pump or condensation dryers unless you have extra space.

            • LordKitsuna@lemmy.world
              link
              fedilink
              arrow-up
              1
              ·
              edit-2
              9 months ago

              Is it like a top load washer or something? I have the melee heat pump dryer and the matching washing machine and they come with a stacking kit. I don’t need to flip it upside down because all the controls are on the front anyway rather than the top

              They are quite compact, as I am using them in an RV at the moment so I needed something capable of fitting through a 24 inch door and those were just fucking barely able to do it at 23 and a quarter inch

              • HappycamperNZ@lemmy.world
                link
                fedilink
                arrow-up
                1
                ·
                9 months ago

                Top load washer, front load dryer. Its a lack of floor space - just uses the empty space above the washing machine. Out of one, into the next, towels over the shoulder to go on the line.

                I never knew you could get stacking kits for heat pump dryers - just told that you can’t flip them so have to be on the floor

    • Scrubbles@poptalk.scrubbles.tech
      link
      fedilink
      English
      arrow-up
      2
      ·
      9 months ago

      I really like this, thanks for sharing. It really does highlight “If we each do just a small change, it will make a noticeable difference”