I bought a monitor since the smarts in my smart-tv died, making the entire display unusable. Now I wanted to use a separate SBC for smarts in the “dumb” monitor. I would have gone for a modded fire-stick, but Amazon in their infinite wisdom, sunset all versions except the 720p potato and the smart-speaker-cube. I’m currently using a RaspberryPi 4 and looking at argon one for a remote control case. Googles widevine does limit the DRM on some content I “own” though. With Amazon on course to EOL the more sane sticks, are there any well-moddable streaming-sticks/boxes, that bring the relevant codecs and DRMs?
+1 for Ugoos. I use an X4Q Plus, which has av1 support, but other than that I did the same setup: coreelec nightly (I like living on the edge). I have a complicated setup due to my networking paranoia and coreelec handles that without issue. I loaded coreelec onto a micro-sd but haven’t used the default android that it came with since day one.
My only real complaint is that SOME av1 files have playback issues, and some play flawlessly. I’m no expert so I haven’t any way to figure it out, and I’ve been too intimidated by the community to try to seek help or report a bug.
That being said, av1 isn’t meant to be an archival format and realistically only excels at network streaming, so it’s better to look for x265/hevc content rather than av1 if all you’re doing is playing locally (or even playing from a NAS on your local network). and, of course, x264 is still pretty much the standard, with the downside being higher filesizes for the same level of quality.
How is the x4q plus? I frankly dont care about av1 (I’m a store everything in remux/flac person) but the x4q, theoretically, should have a faster processor than my aging am6b+
One suggestion I would make is to copy your install of coreelec onto the emmc directly. In my experience that makes everything a bit “snappier”, it’s easy enough to do, and only takes a few minutes.
“SSH into you device; then run ceemmc -x; type in Y; then type in 1. Once the process is complete, remove your external media and enjoy. To speed up CoreELEC installed on the eMMC on Ugoos devices, go to Settings-> CoreELEC → Hardware → eMMC Speed Mode and change it to HS200/HS400”
it’s plenty fast. i have a usb-attached nvme for the stuff i download to watch that I don’t intend to keep, and my main collection on a separate NAS. the microsd I run coreelec from is a samsung evo, i think it’s an A2 and it’s plenty fast. I haven’t installed coreelec to the emmc because i’m running nightly so it’s a decent fallback when CE breaks which does happen once every few months - and allows me to easily make a backup using dd.
there was an issue with x265 playback being out of sync slightly (which could be remedied by seeking back or forwards one step, i used to just do it at the beginning of playback), which persisted for more than a year, but that was resolved about two weeks back, so aside from the occasional av1 issues, I’d consider the X4Q+ the best CE device i’ve ever tested. i had also used one of the homatics boxes that CE supports, but gave it to a friend.
One more note, I have this connected through an hdmi switch (that’s shared with a steam deck and a ps5) to a usb-powered 4k hdr display. CEC works fine, passthrough audio works fine, color depth displays exactly, it’s just a butter smooth experience.
i’m no ugoos evangelist, but the hardware is really solid and fairly cheap and hasn’t failed me yet. i’ve been running this setup for about 2 years (iirc) and probably won’t be needing to upgrade for a while.
edit: for clarification on speed and image caching, my library has roughly 1600 movies, 140 shows with about 5200 episodes, and everything is scraped. there’s never any image loading issues like there is on slower hardware like the rpi and odroid.
I have a similar experience with the am6b+ and a similar sized library. Even on the stock android browsing my iptv provider which has 23,000+ channels has no issue
But you mention cec - does the x4q+ power off and on with the original display remote? That’s my one nag about the am6b+. Ugoos locked the boot loader and refuses to unlock so cec power on doesn’t work, every other cec command does though.
I just have it wake on lan by having homeassistant send it a packet when it notices my avr turns out as a workaround but this isn’t the most elegant solution and like 1:20 times it hiccups