Basic blender went bad (motor ran but spindle wasn’t rotating). I wanted to disassemble to see if it could be repaired. Three of the four screws were Phillips head. I had to cut the casing open in order to discover why I couldn’t unscrew the fourth. It was a slotted spanner.

  • seathru@lemmy.sdf.org
    link
    fedilink
    English
    arrow-up
    3
    arrow-down
    2
    ·
    6 months ago

    Do some comprehending. Yes he had to do that. But it was because he was using the wrong bit.

    • MachineFab812@discuss.tchncs.de
      link
      fedilink
      arrow-up
      1
      arrow-down
      1
      ·
      4 months ago

      Phone camera; $30 digital microscope; $30 Endoscope. There are just so many better ways available to look down a hole to see what’s at the bottom than to tear apart the space around it.

      OP didn’t have to handle it how they did, at all.

      • MachineFab812@discuss.tchncs.de
        link
        fedilink
        arrow-up
        1
        arrow-down
        1
        ·
        4 months ago

        Phone camera; $30 digital microscope; $30 Endoscope. There are just so many better ways available to look down a hole to see what’s at the bottom than to tear apart the space around it.