L4sBotMB to Technology@lemmy.worldEnglish • 10 months agoEthernet is Still Going Strong After 50 Yearsspectrum.ieee.orgexternal-linkmessage-square81fedilinkarrow-up1409arrow-down16file-textcross-posted to: computerhistory@lemmy.capebreton.socialhardware@lemmit.onlinetechnology@lemmy.mlhackernews@derp.foo
arrow-up1403arrow-down1external-linkEthernet is Still Going Strong After 50 Yearsspectrum.ieee.orgL4sBotMB to Technology@lemmy.worldEnglish • 10 months agomessage-square81fedilinkfile-textcross-posted to: computerhistory@lemmy.capebreton.socialhardware@lemmit.onlinetechnology@lemmy.mlhackernews@derp.foo
minus-square@atx_aquarian@lemmy.worldlinkfedilinkEnglish4•10 months agoI always crimp my own, including using slide-on/slide-off hoods. That way I can back the hood off before plugging it into the port, which keeps it easy to disconnect, and I can slide it back on before pulling it through a tight spot.
minus-square@TurnItOff_OnAgain@lemmy.worldlinkfedilinkEnglish3•10 months agoI crimp my own, but never used the hoods before on self made. Usually I run it where it needs to be then put the end on
I always crimp my own, including using slide-on/slide-off hoods. That way I can back the hood off before plugging it into the port, which keeps it easy to disconnect, and I can slide it back on before pulling it through a tight spot.
I crimp my own, but never used the hoods before on self made. Usually I run it where it needs to be then put the end on