• riquisimo@lemmy.dbzer0.com
    link
    fedilink
    English
    arrow-up
    89
    arrow-down
    3
    ·
    4 months ago

    This looks like “dropping an egg into boiling water” and not “bringing the water to a boil with the egg in it,” which is an important distinction.

    • Blackmist@feddit.uk
      link
      fedilink
      English
      arrow-up
      20
      ·
      4 months ago

      I’ve never seen an egg where ten minutes of boiling doesn’t fully solidify the yolk.

    • Willy@sh.itjust.works
      link
      fedilink
      English
      arrow-up
      20
      ·
      4 months ago

      True and it doesn’t seem to care about start egg temp and number of eggs vs amount of water. Without that info it’s not that useful.

        • Willy@sh.itjust.works
          link
          fedilink
          English
          arrow-up
          11
          ·
          4 months ago

          Good call. And elevation if high up. Possibly type of egg too. Even assuming all chicken eggs, some have different ratios of yolk to white. We might be in the weeds at this point though.

    • Deebster@programming.dev
      link
      fedilink
      English
      arrow-up
      16
      arrow-down
      1
      ·
      4 months ago

      Also, is this starting from refrigerated eggs (USA-style) or room temperature (everyone’s else)? I assume this makes less of a difference with your second method.

        • Itsamelemmy@lemmy.zip
          link
          fedilink
          English
          arrow-up
          13
          ·
          edit-2
          4 months ago

          Yes, eggs are washed which removes the protective layer that makes them safe without refrigeration. So our eggs look cleaner, but have to be refrigerated.

          Edit. Looking into this a little more and it seems to be different ways to combat stuff like salmonella. I guess most of the world vaccinates the chickens, plus the cuticle on the egg prevents bacteria from entering through the shell. In the US we wash the eggs and refrigerate to prevent it.

          • AFK BRB Chocolate@lemmy.world
            link
            fedilink
            English
            arrow-up
            7
            ·
            4 months ago

            This is correct, and whenever the topic comes up, there’s always a bunch of misinformation. Like you said, it’s two means to the same end. Early in the washing strategy, like a hundred years ago, some washed eggs from Australia were imported to England, and a bunch of people got sick from them, so Europe decide to go the other route. The US got the washing thing down and decided to keep with it. Today, both approaches work pretty well. Australia, Japan, and some Scandinavian countries also use washing. Worth noting that washing requires an infrastructure of shipping things around refrigerated.

    • workerONE@lemmy.world
      link
      fedilink
      English
      arrow-up
      11
      ·
      edit-2
      4 months ago

      If you bring the water to boil before adding the egg it is much easier to remove the shell

      Edit: I see my comment doesn’t really relate to your comment. I’m tired

      • Gnugit@aussie.zone
        link
        fedilink
        English
        arrow-up
        6
        ·
        4 months ago

        Chef here. Use older eggs for boiling as they are far easier to shell than fresh eggs.

      • DarkThoughts@fedia.io
        link
        fedilink
        arrow-up
        6
        arrow-down
        2
        ·
        4 months ago

        That’s a myth and unrelated. But throwing it into the cold water helps preventing the egg from cracking.

        • Evotech@lemmy.world
          link
          fedilink
          English
          arrow-up
          4
          ·
          4 months ago

          But timing it is surely much easier when the water is boiling. If you just slam it in cold water then you are at the mercy of whatever stove you are using

            • EddoWagt@feddit.nl
              link
              fedilink
              English
              arrow-up
              4
              ·
              4 months ago

              But its not like the not boiling but at 90 degrees Celsius water doesn’t affect the egg

              • DarkThoughts@fedia.io
                link
                fedilink
                arrow-up
                1
                ·
                4 months ago

                Very mildly and primarily the egg white, which most people aren’t eating in its liquid form. The important thing you want to time is the state of the yolk.

        • accideath@lemmy.world
          link
          fedilink
          English
          arrow-up
          2
          ·
          4 months ago

          I just poke a tiny hole in the bottom. And keeping them at room temperature also helps a little, if I’m too lazy to poke.

          • DarkThoughts@fedia.io
            link
            fedilink
            arrow-up
            1
            ·
            4 months ago

            If you referring to egg storage then yeah, mine are not fridge stored either, since I’m not from the US.

        • workerONE@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          ·
          edit-2
          4 months ago

          In my own experience boiling hundreds of eggs over the last couple of years I found that if I don’t start with boiling water then the shells are very difficult to get off. If I start with boiling water the shells slide right off.

          • DarkThoughts@fedia.io
            link
            fedilink
            arrow-up
            1
            ·
            4 months ago

            From what I can tell it depends on the eggs themselves, maybe their freshness, but it is almost always a certain batch of them that have this issue. Doesn’t really matter how you boil them, or if you put them under cold water afterwards. They’d be hard or easy to peal regardless.

            • workerONE@lemmy.world
              link
              fedilink
              English
              arrow-up
              1
              ·
              4 months ago

              Are you in the US? We wash our eggs to remove the coating and then we need to refrigerate them. Could make a difference in how they peel.

              • DarkThoughts@fedia.io
                link
                fedilink
                arrow-up
                1
                ·
                4 months ago

                No I’m not and I don’t store my eggs in the fridge. There’s still an inconsistency with the peeling though and it seems to be rather random, but often with several eggs at once.

        • DarkThoughts@fedia.io
          link
          fedilink
          arrow-up
          4
          arrow-down
          1
          ·
          4 months ago

          No. If you throw the eggs in early and have them warm up with the water they’re less likely to crack.

          • Creat@discuss.tchncs.de
            link
            fedilink
            English
            arrow-up
            2
            ·
            4 months ago

            The whole cracking egg thing is way overblown. For the longest time we poked holes into the side with the air bubble, turns out that didn’t actually do anything either (so we stopped that). It could be that faster or slower heating or the shell makes cracking more or less likely, but unless someone actually (scientifically) tests this, who knows?

            • accideath@lemmy.world
              link
              fedilink
              English
              arrow-up
              2
              ·
              4 months ago

              The pokey thing definitely works. Maybe not 100% of the time but it does work. Keeping them at room temperature also helps a little.

              • Creat@discuss.tchncs.de
                link
                fedilink
                English
                arrow-up
                1
                ·
                edit-2
                4 months ago

                I stopped doing the “pokey thing” and have had roughly the same number of breaks at before, maybe even less (one less point to fracture from without the hole). Subjective interpretation of the effectiveness is useless, as we humans are subject to so many possible bias that’s it’s impossible to be objective, no matter how hard we try. You can’t even eat enough eggs to have a statistically relevant sample size, let alone one large enough to determine if it does or doesn’t “help a little”.

                You “feel” it helps. That’s ok. Also ok to act on. It’s just about boiling your own eggs.

                • accideath@lemmy.world
                  link
                  fedilink
                  English
                  arrow-up
                  1
                  ·
                  4 months ago

                  I‘ve never had a single poked egg break. If I don’t they regularly do. That’s not statistically relevant, sure, but in my personal statistic it seems to work.

            • DarkThoughts@fedia.io
              link
              fedilink
              arrow-up
              1
              ·
              4 months ago

              The hole does work too though? It helps release inside pressure from the heating process. I pretty much never have an egg crack from doing the poke and putting them into the cold water immediately. Meanwhile, not doing either one of those things and they almost always pop.

              • Creat@discuss.tchncs.de
                link
                fedilink
                English
                arrow-up
                1
                ·
                4 months ago

                Just because there’s a logical explanation for why it could work doesn’t mean that’s actually what happens, or that pressure is even the dominant effect causing cracks.

                Cracks could also come from bouncing around in the water, which could be solved by holding them up in some way. Or it could be weak points/areas from not badly formed shells from hens living in too tight quarters or being malnurished, where buying eggs from more humane sources would solve it. Or a combination, where the pressure differences in the water from rising steam bubbles cause uneven water-pressure on the egg, but they only crack when they are sufficiently weak to begin with, so just putting less water in might be enough to not make em crack (cause then there’s also less water pressure). I could be the packaging, that some eggs develop cracks during transport and they then make them vulnerable, so more local or differently packaged eggs wouldn’t crack at all. As you can see, it’s not that hard to come up with logical explanations and just doing a few things differently might just solve the problem, and even then the reason it was resolved might still be something completely different than we thought.

                For comparison: I haven’t poked a hole into an egg in a long time, and I think I had like one or two crack this year. My eggs come from the farmer one street over, and the hens are freeroaming with plenty of space. They don’t get transported at all. Sometimes, I use a steam thingy to boil them, sometimes in water. Even when I did poke holes in, some eggs used to crack anyway, and I’d guess 1 in 3 months in a pretty good guess as to what the frequency was, that’s why I said “roughly the same numer” in another comment.

          • jonne@infosec.pub
            link
            fedilink
            English
            arrow-up
            1
            ·
            4 months ago

            But how do you work out how long they should be boiling, especially if you’re after somewhere in the soft boil sweet spot?

            • DarkThoughts@fedia.io
              link
              fedilink
              arrow-up
              1
              ·
              4 months ago

              I measure from the moment the water starts to boil. 4:30 minutes is a good starting point if you want the yellow to be soft but as mentioned, amount of water, pot, your stove, egg size, it all affects the boiling time quite severely. I wouldn’t add or remove more than 15 seconds either if you want to find that sweet spot because it is definitely not like in the picture. 7-8 minutes is pretty much hard boiled for me, but maybe those are some really fat eggs.

              • jonne@infosec.pub
                link
                fedilink
                English
                arrow-up
                2
                ·
                4 months ago

                Yeah, but then you have to watch your pot for the moment it starts to boil. It’s easier to just boil the water, drop them in and then set a timer.

                • DarkThoughts@fedia.io
                  link
                  fedilink
                  arrow-up
                  1
                  ·
                  4 months ago

                  You have to watch out for your water to start boiling either way, so I don’t see this as much of a problem.

    • Valmond@lemmy.world
      link
      fedilink
      English
      arrow-up
      4
      ·
      4 months ago

      True. Also you can modulate the cooking a bit when you stop it, I empty the hot water and barely cover the eggs with fresh water, letting them cool slowly. For example.

      That said, it’s good indications.

  • JadenSmith@sh.itjust.works
    link
    fedilink
    English
    arrow-up
    46
    arrow-down
    1
    ·
    4 months ago

    This isn’t a very good guide, since it doesn’t even take egg sizes into account. As a fan of egg, these timings are completely wrong for Large Lion Grade A eggs.

      • JadenSmith@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        6
        ·
        4 months ago

        That blimmin’ witch doctor lied to me again!!!
        You’d think I’d learn my lesson after those magic beans…

    • teft@lemmy.world
      link
      fedilink
      English
      arrow-up
      18
      ·
      4 months ago

      Also anyone living above sea level would have severely undercooked eggs. I live almost a mile up and pasta takes two minutes longer to cook so i assume eggs do too.

      • shastaxc@lemm.ee
        link
        fedilink
        English
        arrow-up
        4
        ·
        4 months ago

        Pretty sure most people are above sea level. But I’m no sea doctor.

        • Maggoty@lemmy.world
          link
          fedilink
          English
          arrow-up
          1
          arrow-down
          2
          ·
          4 months ago

          Most of humanity lives on the coastlines. So technically yes. In any functional manner, no.

      • JadenSmith@sh.itjust.works
        link
        fedilink
        English
        arrow-up
        2
        ·
        4 months ago

        Yes! Very good point. I used to use an app for my location, which would adjust the timing based on my elevation from sea level - even though it’s not much where I am, the adjustments certainly made a difference!

        I would link it but it is now riddled with ads, and has a generic name of ‘egg timer’ ._.

      • Drusas@kbin.run
        link
        fedilink
        arrow-up
        1
        ·
        4 months ago

        I’m not really sure such niche accounts need to be taken into consideration on every single guide to how to cook food.

  • nicerdicer@feddit.org
    link
    fedilink
    English
    arrow-up
    6
    ·
    4 months ago

    This guide seems to be a bit off. I prefer 11-min-eggs, for the reason that there is not any liquid yolk present, if boiled that long. In this picture, it would resemble either the 13-min or the 15-min-egg. My egg-boiling altitude is 7 m above sea level for an average sized chicken egg, adding the egg to already boiling water.

    • halloween_spookster@lemmy.world
      link
      fedilink
      English
      arrow-up
      2
      ·
      4 months ago

      I can’t speak to specific numbers but it absolutely does. The higher the altitude, the lower the boiling point. The lower boiling point the lower the temperature you’re cooking with and you have to cook it for longer

  • webghost0101@sopuli.xyz
    link
    fedilink
    English
    arrow-up
    6
    ·
    edit-2
    4 months ago

    I usually do 6 and this meme give me anxiety gang rise up.

    I feel like trypophobia may be part of the effect?

    • Drusas@kbin.run
      link
      fedilink
      arrow-up
      1
      arrow-down
      3
      ·
      4 months ago

      This is about cooking eggs at various donenness levels, not just making hard boiled eggs. You would still need to pay attention to the time in an Instant Pot for that.

        • Drusas@kbin.run
          link
          fedilink
          arrow-up
          1
          arrow-down
          4
          ·
          4 months ago

          It doesn’t work that way, though. And this doesn’t even refer to “a boiled egg”, it refers to boiling eggs.

            • Drusas@kbin.run
              link
              fedilink
              arrow-up
              2
              arrow-down
              5
              ·
              4 months ago

              The wording you have used so far suggests to me that, every time you boil eggs, you hard boil them. Not everybody does that. Some people soft or medium boil their eggs and variations in between.

              So boiling eggs is not the same as hard boiling eggs.